Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 10/29/2015 at 05:25 in reply to: Autofire on the axis #108682
    ttown209
    Participant

    I changed the L to a 1 and it works. Emulationstation now recognized 2 gamepads and I was able to set controls for both. Thanks for taking the time to work this out with me. Keep up the awesome work.

    10/29/2015 at 04:16 in reply to: Autofire on the axis #108679
    ttown209
    Participant

    It is picked up by jtest, and is giving -3, 3, -2, 2. All the buttons on player2 start at 10-15. I put the quirk at the end with one single space between. I am not real sure about mapping the controls in the configs, do i need to do this even though the quirk was installed?

    10/29/2015 at 03:20 in reply to: Autofire on the axis #108674
    ttown209
    Participant

    I ran “lsusb” and it gave me this (16c0:05el VOTI CDC-ACM class devices (modems).
    I am new to this stuff, do i need to map the controllers anywhere? I assume when I reset Emulationstation, it should detect 2 game pads, but it only detects 1.

    10/29/2015 at 00:53 in reply to: Autofire on the axis #108659
    ttown209
    Participant

    Hello,

    I am using Retropie 3.1, new build, and I have entered the usbhid.quirks=0x16c0:0x05el:0x040 at the end of my cmdline.txt. I also have downloaded the custom kernel and placed in my /home/pi folder zipped (ran install). I still show only 1 game pad detected when starting Emulationstation. Any help would be appreciated, I am getting very frustrated with this process.
    P.S.
    And my wife is getting ready to divorce me.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)