Forum Replies Created

Viewing 15 posts - 1 through 15 (of 15 total)
  • Author
    Posts
  • in reply to: BT 8bitdo NES30 Pro On 3.6 #122291
    thak
    Participant

    Throught ssh connection and retropie-setup
    I followed your step, Nothing more
    For the firmware it’s the last one I check every once in a while on 8bitdo website to be sûre i didn’t miss anything

    If you need more information about my set up, i will be glad to help :)

    in reply to: BT 8bitdo NES30 Pro On 3.6 #122289
    thak
    Participant

    I have a nes30pro and a nes30
    And I just made à fresh install this morning and everything work fine

    I made à set up for à friend with 2 nes30 on rpi1 (and Bluetooth dongle) and that works fine too

    Just need to turn on controller on émulationstation screen

    in reply to: BT 8bitdo NES30 Pro On 3.6 #122278
    thak
    Participant

    Thx floob for your update!
    I’m still with retropie 3.6 and rpi3 and my nes30pro connect automaticly if i turn it on at the end of the splashscreen (if not i’d just need to reboot the controller on émulationstation screen)

    Since i found out this i’d never had anymore problem!

    Maybe it’s cause of the rpi3 bt?

    in reply to: Dreamcast #120856
    thak
    Participant

    Hi!

    Thanks to your link on reddit i managed to set-up my nes30 pro (8bitdo) so for anyone who tried to configure this one here’s my config in “/opt/retropie/configs/dreamcast/mappings/controller_8BitdoNES30Pro.cfg”

    [emulator]
    mapping_name = 8Bitdo NES30 Pro
    btn_escape = 314

    [dreamcast]
    btn_a = 304
    btn_b = 305
    btn_c =
    btn_d =
    btn_x = 307
    btn_y = 308
    btn_z =
    btn_start = 315
    btn_dpad1_left =
    btn_dpad1_right =
    btn_dpad1_up =
    btn_dpad1_down =
    btn_dpad2_left =
    btn_dpad2_right =
    btn_dpad2_up =
    btn_dpad2_down =
    axis_x = 0
    axis_y = 1
    axis_trigger_left = 24
    axis_trigger_right =

    [compat]
    btn_trigger_left = 310
    btn_trigger_right = 311
    axis_dpad1_x = 16
    axis_dpad1_y = 17
    axis_dpad2_x =
    axis_dpad2_y =
    axis_x_inverted = no
    axis_y_inverted = no
    axis_trigger_left_inverted =
    axis_trigger_right_inverted =
    axis_dpad1_y_inverted = no
    axis_dpad1_x_inverted = no

    it may be adjusted to have Z and C button mapped on L2/R2 but for now it worked great on Daytona USA/Soul Calibur/Marvel VS Capcom 2

    I’m going back play some more :D

    Thks!

    in reply to: Sega Model 2? #120516
    thak
    Participant

    Hi!

    As link herbfargus, only model3 was compil/code ( i don’t know) for Linux… Model2 run only on Windows or on Linux with vine… So except if someone is skilled enought to adapt model2 on Linux it will ‘ot be possible for now.

    in reply to: BT 8bitdo NES30 Pro On 3.6 #120197
    thak
    Participant

    Ok find out after my fourth trial :D

    The controller need to be turn on on émulationstation screen in otder to work… Kinda strange, but now it works !

    in reply to: BT 8bitdo NES30 Pro On 3.6 #120175
    thak
    Participant

    Hi!

    So you manage to connect your 8Bitdo controller automaticly ?
    How did you do?

    in reply to: 8bitdo Controller didn't connect on boot (RPI3) #119897
    thak
    Participant

    I already tried this on a fresh install and it didn’t work :(

    in reply to: Kickstarter project compatible with retropie ? #111036
    thak
    Participant

    No the OS still on a SDCard, you can only boot with it if i’m not wrong…
    I was thinking on store all data (rom, save state, gamelist, etc…) inside the ssd for the pretty large capacity (and reading speed) he could offer.
    So my concern is more like, can we easely use the ssd like we could use an usb Key?

    thak
    Participant

    Ok, So it works :)
    But… Afyer pairing the 2nd controller and ditectly import the right cfg file from github (your wiki link),because the D-pad don’t have the same input, in retroarch.cfg we need to be sûre which gamepad will be p1 and/or p2 in order to change/adapt the D-pad input correctly !

    I hope my thought was clear ^^

    thak
    Participant

    Hi!

    Can we pair 2 differents 8bitdo contrller?
    Like, in my case, a nes30 and a nes30pro ?
    The nes30 is already working fine, i just need to add the nes30pro!

    Thanks in advance !

    thak
    Participant

    So no hint on how make PiFBA work woth this controller?
    With snes/Genesis/pc engine, FBA is really something :)
    I don’t necesserly need an easy solution, but at least à way to find one

    I’ve tried jtest (or something like that) in order to know the input but in PiFBA fba2x.cfg none works…

    thak
    Participant

    Okay so i do everything as said in the wiki on a fresh install and VOILA :)
    Thx!
    But the lr-fceumm doesn’t seem to work correctly (so i used lr-nestopia and this one is ok)
    And lr-fba is way too slow, does your config would work with PiFBA ?
    I try to change the joystic config in fba2x.cfg to match with retroarch.cfg but no luck

    Anyway everything else work and that’s really great!

    thak
    Participant

    Is it possible to connect 2 controller with your method? If yes how do we connect the second controller?

    thak
    Participant

    Hi,

    I’ve tried your tuto 2 times and each time my controller doesn’t connect.
    They registred correctly but, when i reboot no connection between the pi and nes30, the bluelight still flashing.
    Did you do something else that you forget to mention maybe?

    I’m running retropie 3.0 on PiB

    Thx in advance for your help

Viewing 15 posts - 1 through 15 (of 15 total)