Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 02/04/2016 at 14:21 in reply to: PS3 controller via Bluetooth rumbles and turns off #116203
    softmind
    Participant

    Solved it:

    by doing the following:
    – modify the file /etc/default/sixad: replace LEGACY=0 by LEGACY=2
    – reboot (I even had to unplug the power supply)
    – connect my ps3 controller via usb until emulationstation has started
    – disconnect usb cable and press PS button, it’s connected!

    And repeated the two last steps for the second controller.

    Hope that helped.
    regards.

    02/04/2016 at 14:19 in reply to: PS3 wireless controller – please help! #116202
    softmind
    Participant

    I had the same problem on retropie 3.4, with my bluetooth adapter (ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)), which I solved by doing the following:
    – modify the file /etc/default/sixad: replace LEGACY=0 by LEGACY=2
    – reboot (I even had to unplug the power supply)
    – connect my ps3 controller via usb until emulationstation has started
    – disconnect usb cable and press PS button, it’s connected!

    And repeated the two last steps for the second controller.

    Hope that helped.
    regards.

    01/29/2016 at 15:52 in reply to: PS3 controller via Bluetooth rumbles and turns off #115588
    softmind
    Participant

    Hey there!

    I have the exact same problem with my two ps3 controllers, for your information the dongle I use is shown as “ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)”
    I’m using the latest version of retropie (3.4), fresh install on RPI2.

    Anyone would know how to solve the problem? Could it be dongle related?

    Thanks

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)