Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 03/24/2016 at 23:41 in reply to: How to get Xin-Mo Dual Arcade Working with retropie! Easy guide:-) #121415
    sid723
    Participant

    Anyone have experience with the JUYAO Dual Joystick USB interface board?

    03/18/2016 at 02:59 in reply to: JUYAO Dual Arcade controller not detected at all :( help! #120732
    sid723
    Participant

    Helpman,
    I was in the same boat and now both controllers are working now.
    My issue is that I want to play 2 player games like Street Fighter or Mortal Kombat that have 3 kick and 3 punch buttons and joystick for each player.
    When I set up the buttons I can only get 2 kick and 2 punch buttons to work.
    Do you know how I can configure the buttons to have 3 kick and punch buttons per player working?

    Appreciate any help you can give.
    Thanks.

    Sid723

    03/18/2016 at 02:13 in reply to: JUYAO controller – not correctly recognized by Raspberry Pi? #120730
    sid723
    Participant

    I bought a similar usb dual arcade device on ebay. I thkught it was the Xin-Mo type, but when I hooked it up to the RasPi, it said the type was ‘JUYAO_2_PLAYER_ARCADE’ type. Mine has 22 pins on both sides of the board for each of the 2 players. My issue is that I want to play Mortal Kombat or Street fighter, but I can only get 2 kick and 2 punch buttons to work along with the joysticks. Those games should have 3 punck and kick buttons. Does anyone know how I can change the config to make all 3 kick and punch buttons to work?
    Appreciate any advice.

    Sent from my GT-P3113 using Tapatalk

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)