Forum Replies Created
-
AuthorPosts
-
ranem123Participant
I updated the Retropie Binaries and it work !
Thank you Guys !ranem123Participanti fresh installed nothing modified or anything i also tried to reinstal the Theme but still looks like that ! I remove all Roms and load them from USB what is working fine ! Can you give me an screenshot how my theme folder need to look like ?
I also increased the memory no difference !
Thanks !ranem123ParticipantI tried it to install but getting Errors ! I also tried manual install by but the folder simple to
/etc/emulationstation/themes
but still not working !ranem123Participantanyone knows what to do ?
ranem123ParticipantGuys i try to set up my second Controller but nothing works !
I try
sudo ./retroarch-joyconfig -p2 -j 1 >> /opt/retropie/configs/all/retroarch.cfg
and also
sudo ./retroarch-joyconfig -j 0 >> /opt/retropie/configs/all/retroarch.cfgbut my controller not be recognized in games !
this my my config
input_player2_joypad_index = “1”
input_player2_b_btn = “2”
input_player2_y_btn = “3”
input_player2_select_btn = “8”
input_player2_start_btn = “9”
input_player2_up_axis = “-1”
input_player2_down_axis = “+1”
input_player2_left_axis = “-0”
input_player2_right_axis = “+0”
input_player2_a_btn = “1”
input_player2_x_btn = “0”
input_player2_l_btn = “6”
input_player2_r_btn = “7”
input_player2_l2_btn = “4”
input_player2_r2_btn = “5”
input_player2_l3_btn = “10”
input_player2_r3_btn = “11”
input_player2_l_x_plus_btn = “h0right”
input_player2_l_x_minus_btn = “h0left”
input_player2_l_y_plus_btn = “h0down”
input_player2_l_y_minus_btn = “h0up”
input_player2_r_x_plus_axis = “+3”
input_player2_r_x_minus_axis = “-3”
input_player2_r_y_plus_axis = “+2”
input_player2_r_y_minus_axis = “-2”ranem123ParticipantChange the section for SNES by uncommenting out the line for pisnes, and commenting out the current line. It should look like this when you’re done.
<system>
<fullname>Super Nintendo</fullname>
<name>snes</name>
<path>~/RetroPie/roms/snes</path>
<extension>.smc .sfc .fig .swc .SMC .SFC .FIG .SWC</extension>
<command>/opt/retropie/emulators/pisnes/snes9x %ROM%</command>
<platform>snes</platform>
<theme>snes</theme>
</system>who can give me the stock es_systems.cfg or how i can revert this switch to the stock Snes Emulator ?
ranem123Participanti put all bios from psx into the folder but still getting the message and some games not starting at all like SF3 Alpha loop at Checking Memory Card ! NEED FIX !
ranem123Participantanyone found the solution for n64 . The Games not starting !
ranem123Participant[quote=12753]
<div class=”d4p-bbt-quote-title”>ranem123 wrote:</div>
i try it but still only the d pad works !+
This are my analog settings
input_player1_l_x_plus_axis = “nul”
input_player1_l_x_minus_axis = “nul”
input_player1_l_y_plus_axis = “+1″
input_player1_l_y_minus_axis = “-1″
input_player1_r_x_plus_axis = “nul”
input_player1_r_x_minus_axis = “nul”what is the solution ?
I don’t know exactly other than going through the joystick_config script again, but it doesn’t look like anything has been setup for the X axis.
On my x-box controller, axis 1 is up and down, 0 is left and right.
Unfortunately I don’t have a PS controller to test.
[/quote]I found the solution ! Everything works after delete the retroarch.cfg and set up the controller again ! !
ranem123Participant[quote=12513]If you want to use the analog stick in-game, you’ll have to configure the D pad and left stick as opposites. So when it asks for up/down/left/right, use the analog stick.[/quote]
i try it but still only the d pad works !+
This are my analog settings
input_player1_l_x_plus_axis = “nul”
input_player1_l_x_minus_axis = “nul”
input_player1_l_y_plus_axis = “+1”
input_player1_l_y_minus_axis = “-1”
input_player1_r_x_plus_axis = “nul”
input_player1_r_x_minus_axis = “nul”what is the solution ?
ranem123Participanti try it to set it up again but still not working analog sticks only d pad :( ?
when i set it up it show my analog sticks and i can recognize them but not in the games !ranem123ParticipantHi Guys i use my Ps2 Controller with my adapter (Twin USb ) all working only the analog sticks not working . How i can fix it ?
Thanksranem123ParticipantGuys please help me i cant edit the es_systems.cfg with Winscp getting permission error .
Antoher Question how i can stretch or fit the screen ?
-
AuthorPosts