[Jeffery]

Add this to your retroarch.cfg file
I have different configs set up for each emulator so i can do different things.

input_enable_hotkey_btn = 10
input_exit_emulator_btn = 11

I use arcade controls, so i have a “select” button that is button 10. I am going to use that as my “hotkey” for different macros

[Jeffery]

Bump, please help me

[Jeffery]

Any ideas?

[Jeffery]

Ok,
So i went through that post and did everything. here are the results (still with no prevail.

i2cdetect -y 1
20: 20—–27—

ls /dev/input
by-id by-path event0 event1 event2 event3 js0 js1 mice

sudo jstest /dev/input/js0
0:-32767 1: -32767 0:OFF 1:ON 2:ON 3:ON 4:ON 5:OFF 6:ON 7:ON 8:ON 9:ON 10:ON 11:OFF

i2c kernel is loaded by default

All switches have ~3mV until pressed then short to ground.

Here is my controlblockconfig.cfg.
{
“input” : {
“gamepadtype” : “arcade”
// “gamepadtype” : “arcade”
// “gamepadtype” : “arcade”
// “gamepadtype” : “none”
},
“powerswitch” : {
“activated” : true
}

}

FYI the power switch works perfectly.

Im running version 3.18.7+ PREEMPT on a Pi 1 B+

Here is a pic of my wiring. I pray that you dont tell me the extending of the wires to the pi is causing the problem :)

Thanks,
Jeff

[Author]

Posts