Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 02/29/2016 at 16:22 in reply to: [Solved] Need Help With Power Requirement #118574
    LiquidFlame
    Participant

    Thanks for the info. I also figured out that you need to have a power switch wired up to the ControlBlock in order for it to turn on. You can also apparently go into the config file and turn this setting off.

    02/25/2016 at 17:00 in reply to: Power switch problem with ControlBlock #118095
    LiquidFlame
    Participant

    What size spacers/risers/whatever their called are you using in the picture for the mounting holes with the ControlBlock and RaspberryPi?

    02/12/2016 at 20:42 in reply to: [Solved] Is My Raspberry Pi The Correct Version #116888
    LiquidFlame
    Participant

    Just to make sure the documentation says:
    [quote]The ControlBlock is an add-on board for the Raspberry Pi (version 1 and 2) models A+ and B+.[/quote]

    As far as I know for Raspberry Pi 2, there is only a model B, not a A+ or B+. So I just want to make sure the [url=http://www.amazon.com/Raspberry-Pi-Model-Project-Board/dp/B00T2U7R7I/ref=sr_1_1?s=pc&ie=UTF8&qid=1455306026&sr=1-1&keywords=raspberry+pi]Raspberry Pi 2 Model B[/url] is compatible with the Controlblock.

    Thanks.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)