petrockblock

Forum Replies Created

Viewing 35 posts - 1 through 35 (of 92 total)

1 2 3 →

Author

Posts
03/22/2016 at 02:34 in reply to: Advice/Suggestions on a simple and solder-less arcade stick build! #121112

lilbud
Participant

This place ships to Australia, https://www.ultimarc.com/minipac.html

As for a case, try going to goodwill, when I built my arcade stick. I used a cassette tape holder that I found from goodwill. I drilled the holes in it.

03/13/2016 at 22:48 in reply to: Capturing/Streaming Video #120231

lilbud
Participant

Best thing that I can think of is to use a capture card, No one to my knowledge has been able to stream video from the pi to a computer.

03/13/2016 at 02:31 in reply to: Shutdown RPi in Emulation Station menu #120142

lilbud
Participant

Yes you can shutdown from ES menu,

Sent from my LG-D850 using Tapatalk

03/08/2016 at 00:24 in reply to: RPi2 vs RPi3 – Is it even worth it? #119508

lilbud
Participant

Super FX games will work better on pocketsnes

03/07/2016 at 21:56 in reply to: Video Game Splashscreens #119487

lilbud
Participant

03/06/2016 at 23:31 in reply to: Video Game Splashscreens #119395

lilbud
Participant

Famicom Disk System start up

03/06/2016 at 15:03 in reply to: No sound in games on RetroPie 3.6 on Pi 3 #119316

lilbud
Participant

Uncomment Hdmi-drive in the /boot/config.txt

03/06/2016 at 06:03 in reply to: LXDE Poll #119252

lilbud
Participant

As its own system

But if this were to happen, will it be the jessie desktop or the lxde installed from terminal?

03/05/2016 at 23:59 in reply to: SNES games not starting! #119232

lilbud
Participant

Multiple snes games not working

03/05/2016 at 22:03 in reply to: Add Raspbian Menu to EmulationStation? #119215
lilbud
Participant
In the retropie section, create a new file called “StartX.sh” minus quotes. Type this into terminal, sudo nano /home/pi/retropie/roms/retropie and type the following
```
#!/bin/sh
startx
```
press ctrl + x, y, enter. reboot once file is saved properly. When back in ES, look in the retropie section for startx. select it, and you should be at desktop. You will need mouse and keyboard for desktop.

Good luck
03/05/2016 at 18:32 in reply to: Default RetroArch render resolution #119171

lilbud
Participant

What next on the list of improvements for ES?

03/05/2016 at 15:59 in reply to: Default RetroArch render resolution #119159

lilbud
Participant

Config resolution at default, games look SO much better when displayed at a higher res

03/05/2016 at 15:35 in reply to: Add Raspbian Menu to EmulationStation? #119152

lilbud
Participant

Yo can do this one of two ways. First you can install LXDE onto your existing Retropie image. Or you can download and install Retropie on to a fresh raspbian image. LXDE works, but it just looks terrible.

LXDE: https://github.com/RetroPie/RetroPie-Setup/wiki/FAQ#where-did-the-desktop-go

Manual Install, (Gives you better looking desktop, but you must install retropie yourself.):
https://github.com/RetroPie/RetroPie-Setup/wiki/Manual-Installation

02/28/2016 at 16:12 in reply to: Seeking a game #118420

lilbud
Participant

Is this it?

https://www.youtube.com/watch?v=dB2o1YYggiM

02/28/2016 at 14:15 in reply to: Seeking a game #118412

lilbud
Participant

That sounds like after burner, https://en.wikipedia.org/wiki/After_Burner, Everything except for the planes chasing each other.

02/27/2016 at 13:19 in reply to: SSD Upgrade Recommendations? pls #118343

lilbud
Participant

It is connected through a SATA cable to usb, (http://www.amazon.com/gp/product/B01440BTS8?keywords=sata%20cable&psc=1&qid=1456575414&ref_=sr_1_3&s=pc&sr=1-3-spons) And once plugged into pi, it will act as a big usb drive

P.S If you attach a SSD like this, Put “usb max current = 1” so it will work properly.

02/26/2016 at 12:23 in reply to: Gamesdb down any alternatives for scraping #118220

lilbud
Participant

I have been asking about consolegrid, it is for emulated games on steam. But it could work
https://consolegrid.com

Sent from my LG-D850 using Tapatalk

02/19/2016 at 21:22 in reply to: More 16-bit Splash Screens #117547

lilbud
Participant

How did you get the glow effect to look right? I could not get it to outline each individual letter.

02/19/2016 at 02:58 in reply to: More 16-bit Splash Screens #117504

lilbud
Participant

The earthbound one is awesome, better than mine, Good Work

02/18/2016 at 19:38 in reply to: Leagal to sell handhold game whit pre-loaded retropi #117471

lilbud
Participant

To my knowledge, Retropie is not for commercial use. You could use recalbox, (http://www.recalbox.com/) instead. No bios files can be included, “gba_bios, Scph 1001, ETC. No roms can be included either. Maybe someone else knows more than me, Try asking HerbFargus or another moderator.

Hope this helped

02/17/2016 at 03:06 in reply to: Video Game Splashscreens #117251

lilbud
Participant

Donkey Kong

02/16/2016 at 03:37 in reply to: Video Game Splashscreens #117134

lilbud
Participant

Gunstar Heroes

http://i.imgur.com/vYIy1NP.jpg

02/15/2016 at 17:06 in reply to: How do I use PS3 controller in RetroPie? #117096

lilbud
Participant

In those menus, control is switched to the left thumb stick and the select button

02/15/2016 at 17:04 in reply to: Add database for scraper #117095

lilbud
Participant

Will this do?

consolegrid.com/api/top_picture

02/15/2016 at 01:56 in reply to: Single button exit / single button pause #117062

lilbud
Participant

If you disable hotkey, how do you exit emulator?

Sent from my LG-D850 using Tapatalk

02/14/2016 at 21:31 in reply to: Megadrive project #117040

lilbud
Participant

You could put a usb port in the slot. And a usb drive in the cart. Roms go on the usb drive

02/13/2016 at 20:16 in reply to: Megadrive project #116971

lilbud
Participant

Is the cartridge purely cosmetic, or does it have a function?

02/06/2016 at 15:06 in reply to: Emulation Station config launches at weird times, help! #116362

lilbud
Participant

That is the runcommand menu, it appears, to my knowledge, when you hit a keyboard key. By wiring the buttons and joystick directly to GPIO, they will read as keyboard keys.

02/05/2016 at 04:07 in reply to: Picab Multi Emulator – Portable #116268

lilbud
Participant

I think it would be better if the dpad and face buttons were higher up, possibly above the speakers. Great job regardless

02/04/2016 at 20:52 in reply to: Purely cosmetic question (command line appearing after Emulationstation) #116243

lilbud
Participant

will this be 3.5 or Retropie 4?

01/31/2016 at 17:16 in reply to: Mayflash GameCube Controller Adapter #115778

lilbud
Participant

How do you install the driver?

01/27/2016 at 12:29 in reply to: SSH not working #115277

lilbud
Participant

I did that, and nothing will work. I even tried to change the password for user PI. Still nothing

01/25/2016 at 04:33 in reply to: Video Game Splashscreens #115026

lilbud
Participant

To finish up the Mother/EarthBound series of Splash Screens

01/24/2016 at 16:28 in reply to: Can I remove terminal text between ES and game? #114943

lilbud
Participant

You have to edit /etc/profile.d/10-emulationstation.sh so it reads

[ “tty” = “/dev/tty1” ] && clear && emulationstation > /dev/null 2>&1

01/24/2016 at 14:48 in reply to: Can I remove terminal text between ES and game? #114934

lilbud
Participant

Despite what it says, I believe it works. This removes Boot text and text between ES and Game. Try it and see what happens

http://ananddrs.com/2013/09/18/rpi-hide-boot-msg/
Author

Posts

Viewing 35 posts - 1 through 35 (of 92 total)

1 2 3 →

Forum Replies Created

Login