Forum Replies Created

Viewing 13 posts - 1 through 13 (of 13 total)
  • Author
    Posts
  • in reply to: 2.4.2 No Gamepads detected #93428
    lightthief
    Participant

    I use the set up method where you use the SD card to boot and then a USB drive to actually run everything.

    For me the versions of the software on the sd card and the USB thumb drive weren’t the same. Once I made them the same the issue went away.

    If you’re only using the SD card, which may actually be plenty on a pi2, this wouldn’t be the solution for you.

    Make sure you controllers are plugged in before you turn it on.
    And try search for your specific controller on the forums to see if anyone else got them to work.
    I was using the iBuffalo SNES USB controllers.

    in reply to: How to backup Retropie image for "experiment"? #88540
    lightthief
    Participant

    So I tried this same thing.
    But I moved it to a larger card.
    Is there a way to resize the partition without deleting everything?
    I tried this but it didn’t seem to work correctly.

    in reply to: Source Updates Failing #88517
    lightthief
    Participant

    n00b question, but what do you use to view/open the logs?
    will pico/nano open them?

    in reply to: Mushberry Video Splashscreen #88134
    lightthief
    Participant

    Possibly unrelated follow up question, can so,ething similar be implemented when moving in and out of games so no code shows?

    in reply to: Mushberry Video Splashscreen #88066
    lightthief
    Participant

    So pardon my maybe dumb question,
    Do splash screens play while other things load in the background or does emulation station loading not being till after the Splash screen.

    I’d been disabling it hoping to save a bit of time. But maybe it’s not saving me any time.

    in reply to: Raspberry-pi 2 compatibility #87368
    lightthief
    Participant

    So if you already have a set up, how do you update/migrate w/o losing everything?
    Got my rpi2 but don’t want to have to reformat everytime there is a new release.

    in reply to: Raspberry-pi 2 compatibility #86660
    lightthief
    Participant

    Where are people getting their rpi2s from?
    My order at Newark is just sitting there so far.

    in reply to: Final Burn / Neo-Geo ibuffalo Controller Config #86025
    lightthief
    Participant

    Hmm interesting. I”ll check it out. Thanks.

    in reply to: 2.4.2 No Gamepads detected #85544
    lightthief
    Participant

    Needed to have the SD Card match the version on the USB stick.
    Didn’t think that would be needed but that fixed it.

    in reply to: 2.4.2 No Gamepads detected #85542
    lightthief
    Participant

    Yeah I have two of the I buffalo controllers attached at boot ipand neither are recognized.

    in reply to: 2.4.2 No Gamepads detected #85509
    lightthief
    Participant

    [quote=85495]I have you installed drivers?[/quote]

    I thought for emulation station it would auto detect?

    Not sure where I’d get the drivers for this or how to install them.

    Any pointers would be great.

    in reply to: Emulation Station xbox 360 controllers #82568
    lightthief
    Participant

    I tried different USB controllers. Same issue, so I guess it’s not just the xbox control.
    It just sits at the initial set up screen, recognizes the controller but not the inputs.

    in reply to: Shaders and Performance #2340
    lightthief
    Participant

    Super crashy for me with those setting sadly.

    Are you running the 360 controller?

    My only guess is that it’s not getting enough power and I should get a powered hub.

Viewing 13 posts - 1 through 13 (of 13 total)