[lakespiral]

:(

[lakespiral]

I have the cheap usb snes and nes controlles. Fixed the dpad problem from the Snes controllers by putting hot glue inside. The circuit board had only one screw. Bought two 2,4G playstation clone controllers from ebay but I don’t know how to get them to work. Any ideas? http://www.ebay.com/itm/2-x-2-4G-USB-Wireless-Dual-Vibration-Gamepad-Controller-Joystick-For-PC-Laptop-/310811174850?pt=LH_DefaultDomain_0&hash=item485dca27c2

[lakespiral]

I’ve tried that too. Doesn’t work.

Edit: Seems that other people had had problems with the same dongle too: http://www.modmypi.com/blog/how-to-set-up-the-ralink-rt5370-wifi-dongle-on-raspian

[lakespiral]

Ralink RT5370 Wireless Adapter. It came with a driver cd. Maybe I should install them somehow?

[lakespiral]

auto lo

iface lo inet loopback
iface eth0 inet dhcp

allow-hotplug wlan0
auto wlan0
iface wlan0 inet static
address 91.153.69.86
netmask 255.255.255.0
gateway 192.168.100.1
wpa-ssid "*****"
wpa-psk "*****"
wireless-power off

Netwjork PICO -WiFi-adapter.

[lakespiral]

Well it doesn’t work. Tried with a bunch of different instructions.

[lakespiral]

When I type sudo /etc/init.d/networking restart it says:
[warn] Running /etc/ini.d/networking restart is deprecated because it may not re-enable some interfaces … (warning).
[….] Reconfiguring network interfaces…RTNETLINK answers: Files exists
Failed to bring up wlan0.
done.

[lakespiral]

Why on earth would you hold it with the power button to the right? Are you left handed? In emulationstation only button accepted was “A” (not 2). I started SMB1 with my keyboard. Start and select buttons weren’t anywhere and 1 & 2 didn’t do nothing. Only A & B. And now my playstation controllers or nes controllers won’t work anymore. So after few hours of work, nothing works anymore.

Edit: Fucked up saving es_input.cfg. My bad. But the buttons are still wrong…

[lakespiral]

No. They work the same way as a wireless mouse. Just got a bluetooth dongle in my mail though. Next I’m going to try and get my wiimotes to work. I think it will work on my pc. At least the box said it’s windows compatible. I’ll try when I get home…

[lakespiral]

I had the same problem. Have you splitted your memory? I put 256mb for the gpu and I think the error went away. Worked just fine for a while, but now emulationstation freezes at the loading screen. Argh.

Edit: It froce because I deleted the start.txt files from the emulators I didn’t want.

[Author]

Posts