Forum Replies Created

Viewing 35 posts - 36 through 70 (of 87 total)
  • Author
    Posts
  • in reply to: RetroPie / OpenELEC (KODI) Dual Boot Disc Image #105866
    haris1977
    Participant

    [quote=105437]
    If OpenELEC is displaying ok then tThat would suggest your TV is happy with 1080p, so try changing the retropie resolution to the following, which is 1080p:

    hdmi_group=2
    hdmi_mode=82

    You can also change the aspect ratio inside the main retroarch.cfg file to suit your TV. If you edit the file you will notice that in the ‘aspect ratio’ section I have included (but commented out) a number of different aspect ratio codes – you can try one that works best with your TV (if it is a problem).
    [/quote]

    I have tried changing the values in config.txt but without luck. I also changed #disable_overscan and overscan_left and right values:( No luck. Whatever changes i made to the txt file, no changes on the output.
    I assume that this kind of “problem” is <linked> to the small psx intro video (the one that is launched right after the retropie script inside kodi). This video also has black vertical bars. And ES continues to have black bars.
    So..maybe your psx video is the problem here? Is it in 720 or 1080p?Or maybe a wrong aspect ratio?

    Thanks

    in reply to: RetroPie / OpenELEC (KODI) Dual Boot Disc Image #105824
    haris1977
    Participant

    The only backup procedure i can think of is by going into :

    program addons=>openelec configuration=>system=>create system and kodi backup.

    A *tar backup file is stored in /storage/backups. If i move this file into the same folder of my new image, will this work?

    I am not 100% that’s why i ask..

    in reply to: RetroPie / OpenELEC (KODI) Dual Boot Disc Image #105808
    haris1977
    Participant

    That’s good news! :)

    We are keeping our fingers crossed for the next versions..

    Another question that came to my mind: Is there any way to only update the retropie image – when a new update of yours is going to be released?
    I have setup my openelec build as i want – and it was a pain in the ass (as i had to manually add some favorites etc). So i dont want to re-install both images from the beggining.I am using the usb installation method though..

    in reply to: RetroPie / OpenELEC (KODI) Dual Boot Disc Image #105798
    haris1977
    Participant

    What do y mean by “Un-enabled?”. With an shh extension on the script?

    in reply to: RetroPie / OpenELEC (KODI) Dual Boot Disc Image #105791
    haris1977
    Participant

    Hmm..maybe i haven’t made my self clear.

    It is not a full Blood game yes. It is a Doom-like game, with the doom engine inside. In other words it is like playing a crazy mix of Doom+Wolfenstain but in a Blood World:P

    It is NOT a Zdoom Blood mod convertion i believe though. But i think it needs the shareware Doom.wad file to be included in the PATCHER.EXE. It is like merging Doom+patch=blood. Unfortunately I do not remember how i did it, but here is the patch file to investigate:

    http://www.2shared.com/file/RS3XTZT6/PATCHER.html

    Is the gamepad working within the game?Any lag ?

    in reply to: RetroPie / OpenELEC (KODI) Dual Boot Disc Image #105782
    haris1977
    Participant

    Smithers thanks again. My Openelec’s 1080p display is ok, so i will try to change the resolution in config.txt on the retropie boot partition.

    Here is the Modded Blood wad file (+ the prboom.wad) to check them out. Retroarch needs them both in the same dir in order to run:

    http://www.2shared.com/file/LnhHNNj5/Blood_and_PrBoomwad.html

    Hoping to hear from y:)

    in reply to: RetroPie / OpenELEC (KODI) Dual Boot Disc Image #105763
    haris1977
    Participant

    Thanks Smithers again!

    Unfortunately i do not remember the download site for my *wads. What i remember is that i created them (with patcher.exe). Thesy also needed prboom.wad and Doom.wad i think..I use them with retroarch (windows7) and prboom_libretro.dll and they work..I just told you in case you could revive them in linux

    Anyway, the real thing i am facing now is the black vertical bars (right and left) when i am launching retropie from inside kodi. These bars remain on my EmulationStation menu (where the emulators are). Any ideas why? My tv set is 21:9 aspect ratio and i assume the problem relies in there..

    My tv here : http://www.p4c.philips.com/cgi-bin/cpindex.pl?ctn=56PFL9954H/12&mid=Link_FAQs&scy=GR&slg=AEN

    in reply to: RetroPie / OpenELEC (KODI) Dual Boot Disc Image #105571
    haris1977
    Participant

    Smithers thanks for your quotes!

    1) I have some tweeked .wad files at your disposal (blood.wad too, which is based on doom version) in order to check them out. Here is a list to check :

    http://www.2shared.com/photo/hTlCRwiQ/Untitled.html

    (if you want i can provide you with those files). They work with the prboom_libretro.dll in both my windows and android machines. So i think you may try them!

    2) Look what i found (http://creep.sourceforge.net/). This is the classic c64 game Castles of Dr.Creep. Can you import it in next versions alongside with dinothawr?

    3) I used sudo nano /boot/config.txt, but can see nothing inside this text (null text). Is it normal? Should i only add my overcklocking values? (e.g arm_freq etc). Any “stable” oc values without sd card corruption? What i want is stability (first of all :P)

    4) What is the path for the already downloaded scraper images for the games in “ports”? (duke nukem, quake, doom, etc.). I just want to delete/modify them!

    Thanks!

    in reply to: RetroPie / OpenELEC (KODI) Dual Boot Disc Image #105553
    haris1977
    Participant

    That would be Triple boot :P (nice idea though)!

    in reply to: RetroPie / OpenELEC (KODI) Dual Boot Disc Image #105505
    haris1977
    Participant

    I ve tested your image and overall it is quite impressive:)

    Here are my thoughts/suggestions though:

    1) I d suggest to provide a “clean” kodi image (without any extra addons, except for the game-retropie addon of course).
    2) In retropie now: i couldnt use uae4arm so i reverted back to uae4all (couldnt start any game although my kickstart bios files where in the right folder)
    3) I couldnt use Quake either so i reverted back to quake from binary set up (had a conflict between my keyboard and my xbox 360 controller – i had constant move of the player when controller was on)
    4) Just a though: Brutal Doom is fantastic:D Can you install also Blood (it needs prboom libretro i think) and/or dinothwar?

    I also cannot find a config.txt, in order to overclock..:(

    Overall , your project is awesome!

    in reply to: C64 (vice) no RUN/STOP key? #105424
    haris1977
    Participant

    This is the rom i used

    http://www.2shared.com/file/5Prs19LC/CommandoArcade.html

    I used an other rom and escape button worked ok.

    Edit: The specific rom (commando) doesn’t use run/stop button..I just saw it:P

    in reply to: C64 (vice) no RUN/STOP key? #105413
    haris1977
    Participant

    If this is the case then my rom was bad written:(

    in reply to: C64 (vice) no RUN/STOP key? #105409
    haris1977
    Participant

    Of course and it doesn’t work..(at least on the game i tried)

    Edit: Hm..i think i found a quick solution..

    I Just went into /opt/retropie/configs/all/retroarch.cfg and changed this line (in ####input settings)

    input_exit_emulator = escape

    from “escape” to “del”..

    (the problem in these kind of emulators is that they need BOTH keyboard and Joystick to work. Another problem is that you have to manually swipe joystick port all the time – depending on the game – and that is because there is NO SAVE per game)

    in reply to: White background when i install >8 emulators! #105111
    haris1977
    Participant

    Ok, i will try it asap:) Thanks!

    in reply to: White background when i install >8 emulators! #105100
    haris1977
    Participant

    Edit: This is my Berryboot config (placed in /var/media/mmcblk0p1-mmc-SU04G_0x0886d07c)
    ====================================================

    disable_overscan=1
    start_x=1
    gpu_mem=128

    # Berryboot settings, do not change
    initramfs berryboot.img

    [pi2]
    kernel=kernel_rpi2_aufs.img

    [pi1]
    kernel=kernel_rpi_aufs.img

    # Warning: CMA does not work properly in newer firmware versions
    #
    #cma_lwm=16
    #cma_hwm=32
    #cma_offline_start=16

    =========================================================

    So, am i changing the gpu_mem=128 value? What value should i use?Any problem with my other image (kodi) as well with that change?

    in reply to: RetroPie / OpenELEC (KODI) Dual Boot Disc Image #105096
    haris1977
    Participant

    Thanks Smithers.

    As i am about to try your image there are couple of questions about your project.

    1) can you boot directly into kodi?
    2) when starting retropie from kodi, does the hdmi-cec changes its source? thus getting back to tv? (i had this problem using osmc+retropie when i enabled “send inactive command” through hdmi’s cec options). I wanted this option in order to revert back to my tv when i pressed “shutdown” in kodi..
    3) can you shutdown completely the rpi2 through kodi? (shut down command)
    4) can you update kodi (through the .update folder? This action doesn’t work in berryboot)
    5) can you shutdown completely the rpi2 through retropie?
    6) in your instructions you say “*I have set a particular theme (Aeon) on this build as it supports direct linking to scripts on the
    home menu. It is very important that you *do not* change
    this theme as doing so will remove the short-cut to RetroPie
    from the home screen of KODI. You could change to another
    skin that supports direct linking of scripts but you will
    need to set it all up again yourself.
    . What is the path for the script? Any other skins that support direct linking?

    Thanks!

    in reply to: RetroPie / OpenELEC (KODI) Dual Boot Disc Image #105084
    haris1977
    Participant

    What about sd card corruption issues? Are y facing any ?

    I am asking because as the image is only installed to an sd card (and not usb) corruptions may be present (especially if you overclock your pi2). So any news about that?

    in reply to: White background when i install >8 emulators! #105074
    haris1977
    Participant

    This is the bb file of the retropie i ve downloaded:

    retropie-v3.0-rpi2_squashfs.img256

    How can i increase the memory allocated to gpu ? Through config.txt file?

    haris1977
    Participant

    Similar probl here..

    I get white backgrounds (only the name of the emulator is visible) when i install > 8 emulators (e.g 9 , 10 or 11). I am using a BB image of the latest retropie though.

    in reply to: White background when i install >8 emulators! #104999
    haris1977
    Participant

    So it is a “known” bug :(

    (I thought it was a problem with my BB image)

    Keeping my fingers crossed waiting 4 the issue to be solved!:)

    Thanks!

    in reply to: Problem with DukeNukem 3D and SEGA 32x #104967
    haris1977
    Participant

    Thanks:)

    Any thoughts about my second problem? (IN DukeNukem 3D while i can use my d-pad i cannot use my buttons)

    in reply to: Problem with DukeNukem 3D and SEGA 32x #104882
    haris1977
    Participant

    Oh Thanks! it worked.. The only problem is that lr-picodrive is VERY DEMANDING i suppose (have sound glitches and low speed) even if i have a medium overclock in my rpi1. Does it need more pwer to run or is it a known core stability bug?

    in reply to: RETROPIE vs RECALBOX? (THOUGHT 4 THE DEVS) #104815
    haris1977
    Participant

    [quote=104118]Epe9686518 i agree 100%…

    I tried to install RecalBox on my sdcard and -beleive me- i made it possible only once !! I was trying to do it for 2 hours and i couldnt.. Many many bugs , i had no internet (no ethernet at all), but on the other hand i saw same things that i really liked

    1) Input configuration (with up to 4 controlls)

    2) Update button !!

    3) Kodi launch (from inside recalbox)

    But the most good one about this, was the fact that you could modify some options like hide kodi in emulationstation, or START KODI ON SYSTEM START UP, avoid x button to start kodi etc) something which – i think – Retropie isn’t capable of??…

    [/quote]

    Edit: “Maybe” the source of my installation problems relies on my old Sony sd card..So..i keep my fingers crossed until i manage to install recalbox..

    in reply to: PiFBA Controller manual edit help #104805
    haris1977
    Participant

    I haven’t used a 2nd player configuration yet, so i have the same doubt as you do

    I think that if you have identical joypads, then you just change the numbers (in p2 config) according to your gamepad’s button presses.

    I dont know what is happening with different ones though..

    in reply to: Auto Update RetroPie #104765
    haris1977
    Participant

    This is a good though for future updates. I think you should upload the request to github

    in reply to: PiFBA Controller manual edit help #104750
    haris1977
    Participant

    The fba emulator needs a fba2x.cfg file placed in ~opt/retropie/emulators/pifba

    This file should be like this

    [Joystick]
    A_1=4 –> see these values from retroarch.cfg file or MicrosoftX-Box360pad.cfg file or the file where your controller is saved (button A)
    B_1=5 –> see these values from retroarch.cfg file or MicrosoftX-Box360pad.cfg file or the file where your controller is saved (button B)
    X_1=6 –> see these values from retroarch.cfg file or MicrosoftX-Box360pad.cfg file or the file where your controller is saved (button X)
    Y_1=7 –> see these values from retroarch.cfg file or MicrosoftX-Box360pad.cfg file or the file where your controller is saved (button Y)
    L_1=10 –> see these values from retroarch.cfg file or MicrosoftX-Box360pad.cfg file or the file where your controller is saved
    R_1=11 –> see these values from retroarch.cfg file or MicrosoftX-Box360pad.cfg file or the file where your controller is saved
    START_1=13 –> see these values from retroarch.cfg file or MicrosoftX-Box360pad.cfg file or the file where your controller is saved
    SELECT_1=12 –> see these values from retroarch.cfg file or MicrosoftX-Box360pad.cfg file or the file where your controller is saved
    #Joystick axis
    JA_LR=0
    JA_UD=1

    #player 2 button configuration
    A_2=4
    B_2=5
    X_2=6
    Y_2=7
    L_2=10
    R_2=11
    START_2=13
    SELECT_2=12
    #Joystick axis
    JA_LR_2=0
    JA_UD_2=1

    (Change the numbers according to your gamepad’s button presses)

    haris1977
    Participant

    +1 for this

    On the other hand it would be good to be able to “hide” unwanted roms (especially “bios” files that need to be placed inside /home/pi/RetroPie/roms/

    in reply to: Enhanced DOOM Ports #104680
    haris1977
    Participant

    +1 for Brutal Doom support through ports..

    in reply to: RetroPie / OpenELEC (KODI) Dual Boot Disc Image #104678
    haris1977
    Participant

    Greetings

    I see that this image works only for pi2. Any thoughts about a rasp1 version?

    in reply to: Alternative Emulator for 32X? #104671
    haris1977
    Participant

    Have you succeeded into loading 32x games? Because i get an error

    rc: /opt/retropie/configs/all/dgenrc: No such file or directory
    video: 640×461, 16 bpp (2 Bpp), 60Hz
    sound: 44100Hz, 2048 samples, buffer: 31712 bytes
    joystick: 1 joystick(s) found
    joystick #0:, 6 axes, 11 button(s), 1 hat(s), name: “Microsoft X-Box 360 pad”

    Do you have that file?

    in reply to: Problem with DukeNukem 3D and SEGA 32x #104669
    haris1977
    Participant

    rc: /opt/retropie/configs/all/dgenrc: No such file or directory

    So i guess this must be the problem. How do i create it? What kind of file is it? cfg?

    micah1880 i removed the # but still same problem..

    in reply to: Problem with DukeNukem 3D and SEGA 32x #104612
    haris1977
    Participant

    All of my roms. I also have the bios file (according to this https://github.com/RetroPie/RetroPie-Setup/wiki/BIOS-setup-for-RetroPie)

    Edit: Here is my /tmp/runcommand.log file

    rc: /opt/retropie/configs/all/dgenrc: No such file or directory
    video: 640×461, 16 bpp (2 Bpp), 60Hz
    sound: 44100Hz, 2048 samples, buffer: 31712 bytes
    joystick: 1 joystick(s) found
    joystick #0:, 6 axes, 11 button(s), 1 hat(s), name: “Microsoft X-Box 360 pad”

    in reply to: RETROPIE vs RECALBOX? (THOUGHT 4 THE DEVS) #104598
    haris1977
    Participant

    Oh..i didn’t know about this frontend. But i reckon we are not gonna see it along with ES..(maybe as an addon script?)

    Very very impressive though..

    in reply to: RetroPie and Kodi support #104531
    haris1977
    Participant

    [quote=104466]
    The shortest way for you to do this is installing RetroPie over OSMC, the system boots straight to kodi with CEC support, with a entry on the Main Menu to E.Station. And yes you can reboot or shut down the system through Kodi.

    [/quote]

    I already know that but unfortunately doesnt work for rpi 1..:(

    in reply to: RetroPie and Kodi support #104432
    haris1977
    Participant

    Thanks epe9686518 but i am not really interested in controlling kodi with gamepad (only with cec controller).

    I ve managed to boot straight into kodi, install hdmi-cec, but not shut down my system through kodi..:(

Viewing 35 posts - 36 through 70 (of 87 total)