Forum Replies Created

Viewing 35 posts - 36 through 70 (of 216 total)
  • Author
    Posts
  • in reply to: Mupen64plus won't exit with xbox controller #116723
    g0nz0uk
    Participant

    You have got further than me. Since Retropie 3.4 and above I can’t get my 2 wireless xboxs to work at all on the N64, all other emulators are good, don’t really want to roll back.

    in reply to: N64 xbox controller #116622
    g0nz0uk
    Participant

    also when I go into Mario Kart 64 it says “Connect a controller to socket 1”

    in reply to: N64 xbox controller #116621
    g0nz0uk
    Participant

    Looks like my 2 controllers are seen as js4 and js5, normally they are js0 and js1

    pi@retropie:/dev/input $ ls -lah
    total 0
    drwxr-xr-x 4 root root 240 Feb 7 21:17 .
    drwxr-xr-x 14 root root 3.2K Feb 7 21:17 ..
    drwxr-xr-x 2 root root 100 Feb 7 21:17 by-id
    drwxr-xr-x 2 root root 100 Feb 7 21:17 by-path
    crw-rw—- 1 root input 13, 64 Feb 7 21:17 event0
    crw-rw—- 1 root input 13, 65 Feb 7 21:17 event1
    crw-rw—- 1 root input 13, 70 Feb 7 21:17 event6
    crw-rw—- 1 root input 13, 71 Feb 7 21:17 event7
    crw-rw—- 1 root input 13, 4 Feb 7 21:17 js4
    crw-rw—- 1 root input 13, 5 Feb 7 21:17 js5
    crw-rw—- 1 root input 13, 63 Feb 7 21:17 mice
    crw-rw—- 1 root input 13, 32 Feb 7 21:17 mouse0
    pi@retropie:/dev/input $

    In mupen64plus.cfg I am editing [Input-SDL-Control1] and [Input-SDL-Control2]

    Should I be creating ones for [Input-SDL-Control4] and [Input-SDL-Control5]?

    Thanks

    in reply to: FBA coin button #116472
    g0nz0uk
    Participant

    Thanks dankcusion, nice link too.

    in reply to: FBA coin button #116433
    g0nz0uk
    Participant

    Hello,

    I got the coin button working but can only exit the game from 1 controller

    /opt/retropie/configs/all/retroarch-joypads/XboxGamepad(userspacedriver).cfg set input_enable_hotkey_btn = “10”

    Player 1

    input_device = “Xbox Gamepad (userspace driver)”
    input_driver = “udev”
    input_r_y_plus_axis = “+3”
    input_l3_btn = “11”
    input_r_x_minus_axis = “-2”
    input_r_btn = “7”
    input_save_state_btn = “7”
    input_l2_btn = “4”
    input_start_btn = “9”
    input_exit_emulator_btn = “9”
    input_l_y_minus_btn = “h0leftanalogup”
    input_l_btn = “6”
    input_load_state_btn = “6”
    input_up_axis = “-1”
    input_r_y_minus_axis = “-3”
    input_a_btn = “0”
    input_b_btn = “1”
    input_reset_btn = “1”
    input_down_axis = “+1”
    input_r2_btn = “5”
    input_l_x_plus_btn = “h0leftanalogright”
    input_l_y_plus_btn = “h0leftanalogdown”
    input_r3_btn = “12”
    input_right_axis = “+0”
    input_state_slot_increase_axis = “+0”
    input_x_btn = “2”
    input_menu_toggle_btn = “2”
    input_select_btn = “8”
    input_enable_hotkey_btn = “10”
    input_l_x_minus_btn = “h0leftanalogleft”
    input_y_btn = “3”
    input_left_axis = “-0”
    input_state_slot_decrease_axis = “-0”
    input_r_x_plus_axis = “+2”

    Player 2

    input_device = “Xbox Gamepad (userspace driver) #2”
    input_driver = “udev”
    input_r_y_plus_axis = “+3”
    input_l3_btn = “11”
    input_r_x_minus_axis = “-2”
    input_r_btn = “7”
    input_save_state_btn = “7”
    input_l2_btn = “4”
    input_start_btn = “9”
    input_exit_emulator_btn = “9”
    input_l_y_minus_btn = “h0leftanalogup”
    input_l_btn = “6”
    input_load_state_btn = “6”
    input_up_axis = “-1”
    input_r_y_minus_axis = “-3”
    input_a_btn = “0”
    input_b_btn = “1”
    input_reset_btn = “1”
    input_down_axis = “+1”
    input_r2_btn = “5”
    input_l_x_plus_btn = “h0leftanalogright”
    input_l_y_plus_btn = “h0leftanalogdown”
    input_r3_btn = “12”
    input_right_axis = “+0”
    input_state_slot_increase_axis = “+0”
    input_x_btn = “2”
    input_menu_toggle_btn = “2”
    input_select_btn = “8”
    input_enable_hotkey_btn = “10”
    input_l_x_minus_btn = “h0leftanalogleft”
    input_y_btn = “3”
    input_left_axis = “-0”
    input_state_slot_decrease_axis = “-0”
    input_r_x_plus_axis = “+2”

    in reply to: Sega CD – games list twice in menu #116371
    g0nz0uk
    Participant

    Worked – removing the .cue extensions did it thanks guys.

    in reply to: Multiplayer #116319
    g0nz0uk
    Participant

    Would be great for games like Mario kart.

    in reply to: Music on Boot Menu? #116311
    g0nz0uk
    Participant

    What a great idea, did it work?

    in reply to: Adding zdoom or zandronum? #116310
    g0nz0uk
    Participant

    Does that mean brutal doom is possible on the Pi, I love this on the pc!

    in reply to: Artwork for playstation? #116276
    g0nz0uk
    Participant

    I try scraper again, although last time no luck

    in reply to: Has jstest gone/moved in 3.4? #116275
    g0nz0uk
    Participant

    Is opt/retropie/configs/n64/mupen64plus.cfg still the only way to configure the controllers, there is no GUI for this like the others?

    in reply to: Has jstest gone/moved in 3.4? #116254
    g0nz0uk
    Participant

    Thanks installing now, did the forum go down?

    in reply to: Has jstest gone/moved in 3.4? #116251
    g0nz0uk
    Participant

    pi@retropie:~ $ sudo apt-install joystick
    sudo: apt-install: command not found

    in reply to: 3.4 and Kodi 15.x #116170
    g0nz0uk
    Participant

    Out of interest does Kodi run better through Openelec or Retropie as it’s experimental, or does it make no difference?

    in reply to: Upgrading to Jessie #115794
    g0nz0uk
    Participant

    Agree, still OK to copy the configs folder over the top as I’ve spent make hours changing all that on my 3.3 image?

    in reply to: Upgrading to Jessie #115755
    g0nz0uk
    Participant

    If I upgrade can just copy over my roms and configs folders as my current 3.3 image has been customised quite a bit?

    in reply to: Upgrading to Jessie #115714
    g0nz0uk
    Participant

    Is it worth the upgrade/hassle?

    in reply to: Jessie vs Wheezy Performance #115580
    g0nz0uk
    Participant

    Wow you can get Kodi to show up in Retropie, nice, is this built in now?

    in reply to: Scraping spectrum games #113929
    g0nz0uk
    Participant

    I tried that too Floob, strange as I had the same game or 2 as you and yours has artwork and mine does, is it the naming convention or file format?

    in reply to: Streets of Rage remake #113908
    g0nz0uk
    Participant

    Yes he got a little excited there I must agree, thanks for the discussion though – case closed.

    in reply to: Streets of Rage remake #113896
    g0nz0uk
    Participant

    Could be promising, I’m not sure what Beats of Rage is, great if it could help with the Streets of Rage remake being emulated.

    in reply to: Streets of Rage remake #113876
    g0nz0uk
    Participant
    in reply to: Streets of Rage remake #113875
    g0nz0uk
    Participant

    Floob, saw this seems some have repackage the install and launcher

    http://www.sorrcommunity.com/t148-sor-v5-for-linux-debian-download-links

    in reply to: Streets of Rage remake #113874
    g0nz0uk
    Participant

    My Linux skills are not to good Flood, it’s a truly great game on Windows would be great to see on Retropie.

    Did you have anymore luck in the end?

    I may see if I can contact the chap who did the Linux version to see if he can provide any help, I doubt it but worth a go.

    in reply to: Amiga via EmulationStation #113873
    g0nz0uk
    Participant

    I just can’t find the link, but I saw that someone had somehow created saves states for his games at all over his games menu screens and linked them to ES, they apparently loaded instantly. He was looking at making that save state read only too.

    in reply to: Updating Kodi #113872
    g0nz0uk
    Participant

    Wow you’ve added this to the the experimental menu, I need to try this. Hopefully you will get the official repo.

    in reply to: nbba theme v1.1 #113846
    g0nz0uk
    Participant

    Very nice, well done.

    Would be nice to see a theme for the Game and Watch devices and Scummvm.

    The Amiga and Spectrum ones are great.

    Interesting you put Kodi on there, made me think how I can install it, having that on there means the Retropie is a fully fledged entertainment system.

    in reply to: Game & Watch emulator #113771
    g0nz0uk
    Participant

    Wow, have you got the donkey Kong ones working? Couldn’t see them though.

    Can’t wait to get home and try this!

    in reply to: Streets of Rage remake #112698
    g0nz0uk
    Participant

    Thanks for trying Flood, there is a windows version so at least you guys can have a play, would be awesome to have in Retropie.

    in reply to: tronkyfan possible to get stable? #112453
    g0nz0uk
    Participant

    512 mem split did the trick thanks!

    in reply to: Upgrade 3.2.11 to 3.3 #112434
    g0nz0uk
    Participant

    All is updated and I’ve rebooted and my Xbox controllers are no longer connecting to my official Xbox wireless xbox receiver. Jstest show no controllers and I’ve re-installed the xbox drivers, any ideas?

    pi@retropie ~ $ lsusb
    Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp.
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp.
    Bus 001 Device 004: ID 045e:0719 Microsoft Corp. Xbox 360 Wireless Adapter
    Bus 001 Device 005: ID 0c40:8000
    Bus 001 Device 006: ID 7392:7811 Edimax Technology Co., Ltd EW-7811Un 802.11n Wireless Adapter [Realtek RTL8188CUS]
    pi@retropie ~ $

    in reply to: tronkyfan possible to get stable? #112418
    g0nz0uk
    Participant

    No, but will try when I get home.

    Is there a suggested memory split I should use? I’ve not used that option before so I’m not sure what options I will have.

    in reply to: Upgrade 3.2.11 to 3.3 #112395
    g0nz0uk
    Participant

    Thanks so I just need to update the setup script then run the Binary Installation (recommended option)?

    in reply to: Upgrade 3.2.11 to 3.3 #112391
    g0nz0uk
    Participant

    Great! is there a command to show what version I am on so I can make sure it’s gone from 3.2.1 to 3.3?

    Thanks

    in reply to: White screen of death – tronkyfran theme #111719
    g0nz0uk
    Participant

    Thanks, I just thought as it’s available to download within the Retropie GUI it’s safe to use and has been tried and tested. Then again I think it’s under the experimental menu. I will try the memory split first as this theme is just the best our there by far. If not I will set back to the basic one.

Viewing 35 posts - 36 through 70 (of 216 total)