[fireslayer26]

Hey Matt, can you add a speaker grill to the front of the case like in one of these pictures??

[fireslayer26]

Looks great! Looking forward to the tutorial.

[fireslayer26]

Very cool! Looks great!

[fireslayer26]

Also, would you be able to put a speaker port on the back side? Like a small grill thats on the front of the old Nintendo gameboys?

[fireslayer26]

[quote=104870]I think it’s missing L2 ,R2 and possibly a joystick. Selling open source things is a bad idea, especially when you aren’t a contributor or developer of those projects.

[/quote]

Agreed

[fireslayer26]

No, I haven’t been able to change it. I’m not experience with CAD. If you could change it to put that 5″ screen in it, that would be awesome! Also, you had mentioned before about making the walls a little thinner?

Thanks

[fireslayer26]

Hey Matt,
Any chance you could adjust the CAD file to accommodate this 5″ screen??

http://www.adafruit.com/product/1680

Thanks!

[fireslayer26]

Any update on this project?

[fireslayer26]

Look pretty cool! Any updates? Any videos of it working?

Thanks

[fireslayer26]

Interested to see your 7″ design. Do you think you could upload some modified files with the back buttons lowered and some small slots/holes for an internal speaker?

Thanks,
Richard

[fireslayer26]

sudo sed -i ‘s#<textlist name=”gamelist”>#<textlist name=”gamelist”>\n\t\t\t<scrollSound>./sounds/coin.wav</scrollSound>#g’ /etc/emulationstation/themes/simple/simple.xml && sudo sed -i ‘s#.zip .ZIP##g’ /etc/emulationstation/es_systems.cfg && sudo sed -i ‘s#<extension>#<extension>.zip .ZIP #g’ /etc/emulationstation/es_systems.cfg

[fireslayer26]

Thank you very much! I will try to change your suggestions but I have next to no experience working with 3D models like that.

[fireslayer26]

Good job! Could you post your stl files? Also, how did you connect the extra 2 buttons?

Thanks,
Richard

[fireslayer26]

Very cool retro look! Good job!

[fireslayer26]

Ok thank you!

[fireslayer26]

Didn’t you state in your description above that made the case 2.5cm thick but in the future you would do 2cm?

[fireslayer26]

Ok, thank you. I can most likely get a switch like that at RadioShack here in the states.

Also, I was able to enlarge the button holes and reduce the overall depth of the case from 2.5cm to 2cm. But I’m am having alot of trouble reducing the width of the case walls without distorting it.

[fireslayer26]

Got your email, thank you! Do you remember where you got your power switch?

Thanks!

[fireslayer26]

Also, do you have a wiring schematic?

[fireslayer26]

That would be great if you could send it!

Thank you!

Any tips about the setup? Controller integration with the Pi?

[fireslayer26]

Very nice! Simple and clean. I like it! What did it cost to make the case? Could you get another one?

Thanks,
William

[Author]

Posts