Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 10/13/2015 at 03:49 in reply to: 2 x joystick config #107788
    fightclub
    Participant

    looks like i needed to update the cmdline.txt line with my product id that i got from lsusb.

    i guess my xin-mo isnt the same as everyone elses. it does work now though.

    also, you may want to specify to append that line vice creating a new line. if you create a new line, its not recognized.

    10/13/2015 at 02:52 in reply to: 2 x joystick config #107787
    fightclub
    Participant

    [quote=107584]Try with this:

    https://www.petrockblock.com/forums/topic/2-x-joystick-config/#post-106658

    It’s better that changing Kernel.

    [/quote]
    efraimsangil,

    i added the line to my cmdline.txt file. unfortunately, i dont see anything in /dev/input other than ‘mice’ and my xinmo is connected. is 0x16c0:0x05e1:0x040 the same for all xin-mo’s? when i run lsusb, i get Bus 001 Device 005: ID 0314:0326. ive tried 0x0314:0x0326:0x040 and that isnt recognized either.

    i am running the newest retropie image with a full apt-get upgrade and thats it. no modified kernel.

    any help?

    10/09/2015 at 22:54 in reply to: 2 x joystick config #107559
    fightclub
    Participant

    [quote=104757]Hi!

    You need to change the Linux kernel to use 2 joysticks using XinMo USB controller.

    Try it!

    Custom Kernel for Xinmo
    https://www.dropbox.com/s/f610y6q91mfv9zb/custom_kernel_1.20150317-1.tar.gz?dl=0

    [/quote]

    Can you repost the kernel? its gone from dropbox. thanks!

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)