Forum Replies Created

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • 08/10/2014 at 20:56 in reply to: [Retropie 2.X] list of issues #30095
    derus
    Participant

    I am using emulationstation 2.2 and i cant figure out how to setup the controls for Neo Geo (pifba). I looked into the fba2x.cfg and the gamepad buttons are the same as in retroarch.cfg. So it should work but it doesn’t. Even on the keyboard i am only able to press coin and start. Nothing else works…

    08/07/2014 at 21:07 in reply to: Hiding the rom loading process? #27690
    derus
    Participant

    I am still looking for a solution. Anyone?

    09/13/2013 at 18:00 in reply to: Change Dgen to Picodrive in RetroPie image 1.7 #2764
    derus
    Participant

    I updated some (other) binaries and now it works fullscreen! :D Really weird i dont know why…

    Another question: Picodrive also play my Master System-Roms pretty well but unfortunately also not in fullscreen. You know how to set that up? Changing runcommand to 2 doesnt seem to change anything.

    09/06/2013 at 11:43 in reply to: Change Dgen to Picodrive in RetroPie image 1.7 #2749
    derus
    Participant

    I dont know why but i just experienced that the emulationstation now fits perfect without any overscan. But unfortunately it didnt change anything for picodrive. I still have the borders.

    Another curious thing: Since i removed the 32x-games form the ROM-folder, the sound problems i reported before disapeared.

    09/04/2013 at 20:17 in reply to: Change Dgen to Picodrive in RetroPie image 1.7 #2744
    derus
    Participant

    By the way the resolution in config.txt is at 720p at the moment (hdmi-group=1, hdmi-mode=4).

    09/04/2013 at 20:15 in reply to: Change Dgen to Picodrive in RetroPie image 1.7 #2743
    derus
    Participant

    I know, i am always playing arround with config.txt but i cant find a solution for that. I have set up overscan for top and button to 16, because otherwise the top and button of emulationstation is cut off. Perhaps thats the problem but all the other emulators (NES, SNES, GBA) running in perfect fullscreen. I have a similar problem with gngeo (for Neo Geo) which have a even bigger black frame arround the picture.

    09/03/2013 at 23:15 in reply to: Change Dgen to Picodrive in RetroPie image 1.7 #2737
    derus
    Participant

    Of course, i changed the runcommand in es_setting.cfg to 2, otherwise it will stretch the picture to 16:9. But neither Dgen or Picodrive show me a fullscreen 4:3 picture, there is still a black border arround it.

    I dont want to overlock my pi too much and i dont think that 900mhz will make such a difference, because its really slow at the moment, but maybe it try later.

    What is with composite? I cant test it at the moment. Does it work? Dgen doesnt show a picture over composite output.

    09/03/2013 at 21:56 in reply to: Change Dgen to Picodrive in RetroPie image 1.7 #2735
    derus
    Participant

    First of all thank you for your help! I made probably something wrong and installed it again now and its working.

    But i dont really see how this one is better then Dgen. The sound seems to be worse and the 32x-games are really really slow, completely unplayable. And like in Dgen fullscreen doesnt work.

    Will the composite output work? Can i change settings somewhere do get 32x-games working? My RPi is overclocked to 800mhz by the way. I will try some Mega-CD-games tomorrow too.

    09/03/2013 at 19:33 in reply to: Change Dgen to Picodrive in RetroPie image 1.7 #2732
    derus
    Participant

    i mean mega drive of course ;)

    09/03/2013 at 18:54 in reply to: Change Dgen to Picodrive in RetroPie image 1.7 #2731
    derus
    Participant

    I did everything like you wrote but emulationstation still uses dgen. I probably have to change the master system-entry in es_system.cfg, but to what?

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)