[chris-p81]

Interestingly I came across your post in the libretro forum yesterday where you describe the same problem, unforunately without a solution. Thank you for the patch, unfortunately I’m not an advanced linux user and have not compiled a kernel yet, so I’m a bit reluctant on trying the patch. I’m quite fed up with the mayflash adapter at the moment and am thinking of giving the gpio adapter a try, but I guess I might try the non-autoconfig solution. Do you happen to have a link with a description at hand?

[chris-p81]

BTW: Using the config as described in the videotutorial, the configuration of the controllers is written to HuiJiaUSBGamePag.cfg, not the USBGamepad.cfg!

[chris-p81]

I assume you’re using the same one I am (Mayflash SNES controller adapter for PC).It’s quite straight forward to get the usb adapter to work, it’s just plug and play. You should first check if the RPi sees the device with lsusb. It should be listed as GreenAsia. You should now be able to use the controllers to navigate in the emulation station menu. Then configure your controllers for RetroArch. I used this video as a guide:
https://www.youtube.com/watch?v=OBloKEbBRAU
Unfortunately I can only get one controller to work, there is no response from the second controller in RetroArch.

[chris-p81]

I’m running RetroPie 2.6 but I was concidering an update to 3.0. Maybe that will help. Can you post your config file for the SNES controllers? That would be great help! Which snes controllers Do you use? I use the SNSP-005 controllers (pal version).

[Author]

Posts