Viewing 1 post (of 1 total)
  • Author
    Posts
  • #104254
    firedoggod
    Participant

    first post, so far i have seen similar issues maybe not this specifically

    anyways, updated from rc1 to release 3.0 on my rpi2 before the update everything seemed to be working correctly. after update runs and reboots i come to the gamepad detection and config window. this says it sees 2 gamepads.. i have seen this before after i installed the extra 360 driver but this time its not detecting any inputs. so i decided to wipe and install clean.

    after it comes back up detects 1 gp and i can config got all the binarys and basic config done. then install that driver and reboot and boom 2 gp’s detected.. so i plug my keyboard in. still not accepting any inputs still oddly says 2 detected.. so i unhook all input devices and reboot. still thinks 2 gp’s are connected..im not sure what to do at this point.

    reason why i use this other driver is cause of how the default has the triggers setup as axis’s and that seems not to configure well. only lets me config the left and always skips the right. if i can make it work then no need for the other driver

    otherwise to setup the other driver i didint remember having to do anything special before but something i guess changed or something. anyways any help is appreciated.

Viewing 1 post (of 1 total)
  • The forum ‘Controller Configuration in RetroPie’ is closed to new topics and replies.