Setting up PS3 Remote for SMS / Osmose

[HoustoneD]

I am slowly, but surely getting everything working in my RetroPie.

Right now, my current hurdle to get over is getting my master system up and running.

Genesis, SNES, NES, N64, and Atari all seem to be working using my PS3 Dual Shock Controller, over USB and also with bluetooth.

Even playing some SMS ROMS through the Megadrive Emulator seems to work fine.

I am running RetroPie 3.2.1 (fully updated, updated emulator binaries, setup script, etc.) on a RPi2.

Hopefully these snippets will help provide some insight as to what my issue is. i am sure it is something easy. Please help!

#### Input

# Input driver. Depending on video driver, it might force a different input driver.
# input_driver = sdl

# Input device driver. (Valid: linuxraw, sdl, dinput)
# input_joypad_driver =

# Path to input remapping file.
# input_remapping_path =

# If enabled, overrides the input binds with the remapped binds set for the current core.
# input_remap_binds_enable = true

# Maximum amount of users supported by RetroArch.
# input_max_users = 16

# Keyboard layout for input driver if applicable (udev/evdev for now).
# Syntax is either just layout (e.g. “no”), or a layout and variant separated with colon (“no:nodeadkeys”).
# input_keyboard_layout =

# Defines axis threshold. Possible values are [0.0, 1.0]
# input_axis_threshold = 0.5

# Enable input auto-detection. Will attempt to autoconfigure
# joypads, Plug-and-Play style.
input_autodetect_enable = true

# Show the input descriptors set by the core instead of the
# default ones.
# input_descriptor_label_show = true

# Hide input descriptors that were not set by the core.
# input_descriptor_hide_unbound = false

# Directory for joypad autoconfigs.
# If a joypad is plugged in, that joypad will be autoconfigured if a config file
# corresponding to that joypad is present in joypad_autoconfig_dir.
# Input binds which are made explicit (input_playerN_*_btn/axis) will take priority over autoconfigs.
# Autoconfigs can be created with retroarch-joyconfig, manually, or with a frontend.
# Requires input_autodetect_enable to be enabled.
joypad_autoconfig_dir = /opt/retropie/configs/all/retroarch-joypads/

# Sets which libretro device is used for a user.
# Devices are indentified with a number.
# This is normally saved by the menu.
# Device IDs are found in libretro.h.
# These settings are overridden by explicit command-line arguments which refer to input devices.
# None: 0
# Joypad (RetroPad): 1
# Mouse: 2
# Keyboard: 3
# Generic Lightgun: 4
# Joypad w/ Analog (RetroPad + Analog sticks): 5
# Multitap (SNES specific): 257
# Super Scope (SNES specific): 260
# Justifier (SNES specific): 516
# Justifiers (SNES specific): 772

# input_libretro_device_p1 =
# input_libretro_device_p2 =
# input_libretro_device_p3 =
# input_libretro_device_p4 =
# input_libretro_device_p5 =
# input_libretro_device_p6 =
# input_libretro_device_p7 =
# input_libretro_device_p8 =

# Keyboard input. Will recognize letters (“a” to “z”) and the following special keys (where “kp_”
# is for keypad keys):
#
# left, right, up, down, enter, kp_enter, tab, insert, del, end, home,
# rshift, shift, ctrl, alt, space, escape, add, subtract, kp_plus, kp_minus,
# f1, f2, f3, f4, f5, f6, f7, f8, f9, f10, f11, f12,
# num0, num1, num2, num3, num4, num5, num6, num7, num8, num9, pageup, pagedown,
# keypad0, keypad1, keypad2, keypad3, keypad4, keypad5, keypad6, keypad7, keypad8, keypad9,
# period, capslock, numlock, backspace, multiply, divide, print_screen, scroll_lock,
# tilde, backquote, pause, quote, comma, minus, slash, semicolon, equals, leftbracket,
# backslash, rightbracket, kp_period, kp_equals, rctrl, ralt
#
# Keyboard input, Joypad and Joyaxis will all obey the “nul” bind, which disables the bind completely,
# rather than relying on a default.
input_player1_a = x
input_player1_b = z
input_player1_y = a
input_player1_x = s
input_player1_start = enter
input_player1_select = rshift
input_player1_l = q
input_player1_r = w
input_player1_left = left
input_player1_right = right
input_player1_up = up
input_player1_down = down
# input_player1_l2 =
# input_player1_r2 =
# input_player1_l3 =
# input_player1_r3 =

# Two analog sticks (DualShock-esque).
# Bound as usual, however, if a real analog axis is bound,
# it can be read as a true analog.
# Positive X axis is right, Positive Y axis is down.
# input_player1_l_x_plus =
# input_player1_l_x_minus =
# input_player1_l_y_plus =
# input_player1_l_y_minus =
# input_player1_r_x_plus =
# input_player1_r_x_minus =
# input_player1_r_y_plus =
# input_player1_r_y_minus =

# If desired, it is possible to override which joypads are being used for user 1 through 8.
# First joypad available is 0.
# input_player1_joypad_index = 0
# input_player2_joypad_index = 1
# input_player3_joypad_index = 2
# input_player4_joypad_index = 3
# input_player5_joypad_index = 4
# input_player6_joypad_index = 5
# input_player7_joypad_index = 6
# input_player8_joypad_index = 7

# Input device buttons.
# Figure these out by using RetroArch-Phoenix or retroarch-joyconfig.
# You can use joypad hats with hnxx, where n is the hat, and xx is a string representing direction.
# E.g. “h0up”
# input_player1_a_btn =
# input_player1_b_btn =
# input_player1_y_btn =
# input_player1_x_btn =
# input_player1_start_btn =
# input_player1_select_btn =
# input_player1_l_btn =
# input_player1_r_btn =
# input_player1_left_btn =
# input_player1_right_btn =
# input_player1_up_btn =
# input_player1_down_btn =
# input_player1_l2_btn =
# input_player1_r2_btn =
# input_player1_l3_btn =
# input_player1_r3_btn =

# Menu buttons.
# menu_ok_btn =
# menu_cancel_btn =
# menu_search_btn =
# menu_info_btn =
# menu_default_btn =
# menu_scroll_down_btn =
# menu_scroll_up_btn =

# Axis for RetroArch D-Pad.
# Needs to be either ‘+’ or ‘-‘ in the first character signaling either positive or negative direction of the axis, then the axis number.
# Do note that every other input option has the corresponding _btn and _axis binds as well; they are omitted here for clarity.
# input_player1_left_axis =
# input_player1_right_axis =
# input_player1_up_axis =
# input_player1_down_axis =

# Holding the turbo while pressing another button will let the button enter a turbo mode
# where the button state is modulated with a periodic signal.
# The modulation stops when the button itself (not turbo button) is released.
# input_player1_turbo =

# Describes the period and how long of that period a turbo-enabled button should behave.
# Numbers are described in frames.
# input_turbo_period = 6
# input_turbo_duty_cycle = 3

# This goes all the way to user 8 (*_player2_*, *_player3_*, etc), but omitted for clarity.
# All input binds have corresponding binds for keyboard (none), joykeys (_btn) and joyaxes (_axis) as well.

# Toggles fullscreen.
# input_toggle_fullscreen = f

# Saves state.
# input_save_state = f2
# Loads state.
# input_load_state = f4

# State slots. With slot set to 0, save state name is *.state (or whatever defined on commandline).
# When slot is != 0, path will be $path%d, where %d is slot number.
# input_state_slot_increase = f7
# input_state_slot_decrease = f6

# Toggles between fast-forwarding and normal speed.
# input_toggle_fast_forward = space

# Hold for fast-forward. Releasing button disables fast-forward.
# input_hold_fast_forward = l

# Key to exit RetroArch cleanly.
# Killing it in any hard way (SIGKILL, etc) will terminate RetroArch without saving RAM, etc.
# On Unix-likes, SIGINT/SIGTERM allows a clean deinitialization.
input_exit_emulator = escape

# Applies next and previous shader in directory.
input_shader_next = m
input_shader_prev = n

# Hold button down to rewind. Rewinding must be enabled.
input_rewind = r

# Toggle between recording and not.
# input_movie_record_toggle = o

# Toggle between paused and non-paused state
# input_pause_toggle = p

# Frame advance when content is paused
# input_frame_advance = k

# Reset the content.
# input_reset = h

# Cheats.
# input_cheat_index_plus = y
# input_cheat_index_minus = t
# input_cheat_toggle = u

# Mute/unmute audio
# input_audio_mute = f9

# Take screenshot
# input_screenshot = f8

# Netplay flip users.
# input_netplay_flip_players = i

# Hold for slowmotion.
# input_slowmotion = e

# Enable other hotkeys.
# If this hotkey is bound to either keyboard, joybutton or joyaxis,
# all other hotkeys will be disabled unless this hotkey is also held at the same time.
# This is useful for RETRO_KEYBOARD centric implementations
# which query a large area of the keyboard, where it is not desirable
# that hotkeys get in the way.

# Alternatively, all hotkeys for keyboard could be disabled by the user.
# input_enable_hotkey_btn =

# Increases audio volume.
# input_volume_up = kp_plus
# Decreases audio volume.
# input_volume_down = kp_minus

# Toggles to next overlay. Wraps around.
# input_overlay_next =

# Toggles eject for disks. Used for multiple-disk content.
# input_disk_eject_toggle =

# Cycles through disk images. Use after ejecting.
# Complete by toggling eject again.
# input_disk_next =

# Toggles menu.
# input_menu_toggle = f1

# RetroPad button combination to toggle menu
# 0 = none, 1 = L + R + Y + D-Pad Down, 2 = L3 + R3
# input_menu_toggle_gamepad_combo = 0

# Toggles mouse grab. When mouse is grabbed, RetroArch hides the mouse,
# and keeps the mouse pointer inside the window to allow relative mouse input
# to work better.
# input_grab_mouse_toggle = f11

And my two PS3 configs-

input_device = “PLAYSTATION(R)3 Controller”
input_driver = “udev”
input_b_btn = “14”
input_y_btn = “12”
input_select_btn = “0”
input_start_btn = “3”
input_up_btn = “4”
input_down_btn = “6”
input_left_btn = “7”
input_right_btn = “5”
input_a_btn = “13”
input_x_btn = “15”
input_l_btn = “10”
input_r_btn = “11”
input_l2_btn = “8”
input_r2_btn = “9”
input_l3_btn = “1”
input_r3_btn = “2”
input_l_x_plus_axis = “+0”
input_l_x_minus_axis = “-0”
input_l_y_plus_axis = “+1”
input_l_y_minus_axis = “-1”
input_r_x_plus_axis = “+2”
input_r_x_minus_axis = “-2”
input_r_y_plus_axis = “+3”
input_r_y_minus_axis = “-3”
input_enable_hotkey_btn = “0”
input_exit_emulator_btn = “3”
input_menu_toggle_btn = “15”
input_load_state_btn = “10”
input_save_state_btn = “11”
input_reset_btn = “14”
input_state_slot_increase_btn = “5”
input_state_slot_decrease_btn = “7”

input_device = “Sony PLAYSTATION(R)3 Controller”
input_driver = “udev”
input_r_y_plus_axis = “+3”
input_l3_btn = “1”
input_r_x_minus_axis = “-2”
input_r_btn = “9”
input_save_state_btn = “9”
input_l2_btn = “10”
input_start_btn = “3”
input_exit_emulator_btn = “3”
input_l_y_minus_axis = “-1”
input_l_btn = “8”
input_load_state_btn = “8”
input_up_btn = “4”
input_r_y_minus_axis = “-3”
input_a_btn = “14”
input_b_btn = “13”
input_reset_btn = “13”
input_down_btn = “6”
input_r2_btn = “11”
input_l_x_plus_axis = “+0”
input_l_y_plus_axis = “+1”
input_r3_btn = “2”
input_right_btn = “5”
input_state_slot_increase_btn = “5”
input_x_btn = “15”
input_menu_toggle_btn = “15”
input_select_btn = “0”
input_enable_hotkey_btn = “0”
input_l_x_minus_axis = “-0”
input_y_btn = “12”
input_left_btn = “7”
input_state_slot_decrease_btn = “7”
input_r_x_plus_axis = “+2”

Thanks in advance for the help.

[Author]

Posts