Homepage › Forums › RetroPie Project › Everything else related to the RetroPie Project › RaspberryPi Mobel B+ Issues

  • This topic has 3 replies, 2 voices, and was last updated 10 years ago by Anonymous.
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 11/10/2014 at 21:16 #82602
    Anonymous
    Inactive

    Hi Everyone,

    I bought a Raspberry Pi Model B+ (as I wanted lots of USB ports), I downloaded the RetroPie Project SD-card Image V2.3 image via PetrockBlog downloads page & Win32 Disk Imager v0.9.5 via Sourceforge.

    I then loaded the RetroPi image onto an 64GB exFAT (128kb allocated) MicroSD card using Win32 Disk Imager and safely ejected the card. Stuck it into the RaspberryPi, plugged in the HDMI and power and nothing.

    Blank screen.
    Any thoughts?

    11/10/2014 at 22:46 #82604
    fortinbra
    Participant

    You might try formatting as FAT instead of exFAT, then once it boots, expand via the raspi-config. I had to do this to get my 16GB to work.

    11/11/2014 at 00:29 #82608
    Anonymous
    Inactive

    Isn’t it only possible to format FAT up to 32GB?

    11/11/2014 at 20:14 #82637
    Anonymous
    Inactive

    Sorted it out… Now need to wait for the controllers to arrive and find my old USB keyboard!

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Everything else related to the RetroPie Project’ is closed to new topics and replies.