Homepage Forums RetroPie Project Controller Configuration in RetroPie Playstation dual shock 4

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #102891
    dragonjab
    Participant

    Hi, I’m using the Playstation dual shock 4, everything works perfect on every emulator even mame. The only problem I’m having is with FBA, final burn alpha. I’m using the lr-fba. All my controls work except for the start and insert coin button. What could be the problem? I even put the controls directly into the fba retroarch file and without any luck. Is also weird because my hotkey works. My hotkey is select and when I hit start and select I exit out the menu. I went tot he rgui and it says coin select and start is the start button in my case button 9.
    select = 8
    start =9

    #102900
    dankcushions
    Participant

    Hi,

    This is a known issue, although it doesn’t appear to have anyone interested in fixing it, yet! https://github.com/libretro/fba-libretro/issues/46

    #102914
    dragonjab
    Participant

    HI @dankcushions
    I figure out the solution to my problem. Since the hokey on my controller is set to select and the Coin for the emulator is set to select. The emulator would choose the hotkey over the coin. So what I did was set a different hotkey just for FBA. I did this by going into the FBA retroarch file.
    So at first my hotkey was
    input_enable_hotkey_btn = “8” // select

    and then I change it on the FBA retroarch file using sudo nano
    the new config is
    input_enable_hotkey_btn = “4” // which is my L1 bumbper button

    so now hotkey = L1
    and
    Coin = Select

    #102945
    nreko
    Participant

    Hi! Im new to this!

    Do you have a guide to add the PS4 controller?
    I would love to get my PS4 controllers to work on this beauty!

    Thanks
    Nreko

    #102952
    dragonjab
    Participant

    just add this to
    cd /opt/retropie/configs/all/retroarch-joypads/

    create a file on notepad with this info and name it
    Sony-PlayStation4-DualShock4-Controller.cfg
    input_device = “Sony Computer Entertainment Wireless Controller”
    input_driver = “udev”
    input_vendor_id = 1356
    input_product_id = 1476
    input_b_btn = “1”
    input_y_btn = “0”
    input_select_btn = “8”
    input_start_btn = “9”
    input_up_btn = “h0up”
    input_down_btn = “h0down”
    input_left_btn = “h0left”
    input_right_btn = “h0right”
    input_a_btn = “2”
    input_x_btn = “3”
    input_l_btn = “4”
    input_r_btn = “5”
    input_l2_btn = “6”
    input_r2_btn = “7”
    input_l3_btn = “10”
    input_r3_btn = “11”
    input_l_x_plus_axis = “+0”
    input_l_x_minus_axis = “-0”
    input_l_y_plus_axis = “+1”
    input_l_y_minus_axis = “-1”
    input_r_x_plus_axis = “+2”
    input_r_x_minus_axis = “-2”
    input_r_y_plus_axis = “+5”
    input_r_y_minus_axis = “-5”
    input_menu_toggle_btn = “3”

    input_b_btn_label = “Cross”
    input_y_btn_label = “Square”
    input_select_btn_label = “Options”
    input_start_btn_label = “Share”
    input_up_btn_label = “D-Pad Up”
    input_down_btn_label = “D-Pad Down”
    input_left_btn_label = “D-Pad Left”
    input_right_btn_label = “D-Pad Right”
    input_a_btn_label = “Circle”
    input_x_btn_label = “Triangle”
    input_l_btn_label = “L1”
    input_r_btn_label = “R1”
    input_l2_btn_label = “L2”
    input_r2_btn_label = “R2”
    input_l3_btn_label = “L3”
    input_r3_btn_label = “R3”
    input_l_x_plus_axis_label = “Left Analog Right”
    input_l_x_minus_axis_label = “Left Analog Left”
    input_l_y_plus_axis_label = “Left Analog Down”
    input_l_y_minus_axis_label = “Left Analog Up”
    input_r_x_plus_axis_label = “Right Analog Right”
    input_r_x_minus_axis_label = “Right Analog Left”
    input_r_y_plus_axis_label = “Right Analog Down”
    input_r_y_minus_axis_label = “Right Analog Up”
    input_menu_toggle_btn_label = “PS”
    input_enable_hotkey_btn = “8”
    input_exit_emulator_btn = “9”
    input_load_state_btn = “6”
    input_save_state_btn = “7”
    input_reset_btn = “1”
    input_state_slot_increase_btn = “h0right”
    input_state_slot_decrease_btn = “h0left”
    # input_shader_next_btn = “5”
    # input_shader_prev_btn = “4”

    This drivers come included with the Retropie RC1

    #102956
    nreko
    Participant

    dragonjab, thank you!

    But is this usb or wireless? And if i want two ps4 controllers, how do i do then?
    Im very thankful for the help

Viewing 6 posts - 1 through 6 (of 6 total)
  • The forum ‘Controller Configuration in RetroPie’ is closed to new topics and replies.