Hi Alls, i’ve installed the mk_arcade_joystick_rpi driver but the last Retropie Version (3.4) and i noticed that the file /etc/modules is not loaded at boot time… suggestions?
It works fine when i give this command in the terminal…
sudo modprobe mk_arcade_joystick_rpi map=1 (26 pin GPIO Raspberry or 40 pin Raspberry with one joystick)
sudo modprobe mk_arcade_joystick_rpi map=1,2 (40 pin Raspberry with two joystick)
thanks!
Author
Posts
Viewing 1 post (of 1 total)
The forum ‘GPIO Adapter, ControlBlock etc.’ is closed to new topics and replies.