Homepage › Forums › RetroPie Project › Controller Configuration in RetroPie › 1 USB-Port > 2 Controllers. Only 1 is working

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 02/03/2016 at 12:24 #116096
    Anonymous
    Inactive

    hi everyone,

    first of all: i already tried but failed to find a thread with the same topic.

    now to my problem: i have a custom arcade controller board with two sticks and 12 buttons. they are all connected to my dual strike pcb with a single usb-port (illustration image attached). the key strike manager is recognizing all sticks and buttons. but in retropie i can only configure the first stick and the suited six buttons.

    what do i have to do to get the second player working?

    thanks in advance for your helb.

    02/04/2016 at 17:06 #116230
    rookervik
    Participant

    Hey, I have Shanwan controllers that both use a single USB dongle. To get Retroarch to use them, you need to set up both player 1 and player 2 to use the same controller. Just make sure to configure player 2 on that second controller. Maybe this will work on yours as well. *crosses fingers*

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Controller Configuration in RetroPie’ is closed to new topics and replies.