Homepage › Forums › RetroPie Project › Everything else related to the RetroPie Project › RetroPie 3.0 Beta Overview

Viewing 35 posts - 1 through 35 (of 41 total)
1 2
  • Author
    Posts
  • 03/27/2015 at 03:04 #92779
    herbfargus
    Member

    I created a simple video just showing the major changes with the most recent SD image release. You can also check out the change log to see a complete list of the most recent changes.

    (https://www.petrockblock.com/retropie/retropie-downloads/download-info/retropie-project-sd-card-image-for-raspberry-pi-2-version-3-0-beta/)

    03/27/2015 at 09:53 #92790
    justinbeaird
    Participant

    Still has problems with ps3 controller :(

    03/27/2015 at 15:35 #92812
    monochromatic
    Participant

    I’m on 2.6 currently, and I’m wondering if I’d need to do a new SD card image to upgrade… or if just doing a binary install from retropie_setup.sh would do the same thing. Anybody know the answer?

    03/27/2015 at 16:13 #92816
    herbfargus
    Member

    If I were you I’d just go to the 3.0 image. Its easiest to start from a fresh image as most things are tested to work. (Plus it will clean up your ROMs folders) but you could get away with a full binary install to get most of the new functionality. A fresh image is just a lot cleaner.

    03/27/2015 at 16:47 #92819
    monochromatic
    Participant

    Ok will do, thanks. Any idea just how “beta” this release is, or when the official 3.0 is likely to be ready? I’m wondering if I should just wait for the official one, or if this beta is already solid.

    03/27/2015 at 16:55 #92822
    mcbourne
    Participant

    Thanks everyone for your hard work on this! Can’t wait to do some testing this weekend.

    03/27/2015 at 17:29 #92827
    herbfargus
    Member

    I tested a lot of the functionality before the beta was released and the major bugs for the most part were taken care of by Buzz. Thus far some people have had issues with UK keyboards/ ps3 controllers but I’m not sure how specific they are to version 3.0 vs just typical configuration issues. I’ll put it this way- it’s much more stable than the 2.42 beta image was. But I haven’t tested it fully but initially it seems pretty stable. Just give it a go and see how it compares with 2.6.

    03/27/2015 at 20:35 #92844
    Jara
    Participant

    I’m having some issues with the controllers.
    I do the retroarch config like usual, but the retroarch.cfg remains unchanged. Could be something about permissions, will check that later.
    SNES controllers are all messed up.

    So far I’ve liked the changes made. I’ll just have to try each of the emulators and options to find the most optimal one for each system.

    03/27/2015 at 20:38 #92845
    trixster
    Participant

    After an update of the retropie-update script and then a binary install of the emulators I’m using I’m running into problems with version 3.0. I’ve upgraded from 2.6 to 3.0.

    I took a copy of my various configs folders first (as well as some cfg files for emulators like pisnes and pifba). After the install of 3.0 binaries I copied back over the relevant config files (mainly retroarch.cfg for individual emulators) as i didnt want to have to go through the pain of re-configuring everything agai. Now anything which runs from a libretro core will not load, it quits back into emulationstation with a segmentation fault.

    I do not want to have to use the download image as i already have a ton of other stuff on my current install. Is there a way to upgrade from 2.6 to 3.0 without re-imaging the sd card but still retaining all the time-precious config file changes that have been made?

    03/27/2015 at 20:40 #92846
    petrockblog
    Keymaster

    you shouldn’t overwrite the retroarch.cfg’s – the updater will not delete any content from them, but it does add some important stuff, which you will have overwritten when copying yours back over.

    03/27/2015 at 20:49 #92848
    trixster
    Participant

    Ah, right, I see. Didn’t realise that! I’ll give it another go. Luckily I took an image of my sd card prior to doing the ‘update’ so i can try again. Thanks for the quick reply!

    03/27/2015 at 21:10 #92853
    petrockblog
    Keymaster

    I just made a minor change related to this, so make sure you have the latest retropie-setup and go from there. it should update the configurations without breaking anything, but take a backup to be sure.

    03/27/2015 at 21:24 #92862
    kmhamel
    Participant

    I too would like to update 2.6 to 3.0 using the binary. My system runs on a hard drive using berryboot. In a comment above, it was stated that if you updated using the binary you would not get all the effects of the upgrade and the rom files would not be cleaned up.

    So my question:
    1) what do I need to do to manually clean up my rom files after I upgrade.
    2) what do I need to manually change to get the full effect of the upgrade.

    Thanks

    03/27/2015 at 21:32 #92865
    petrockblog
    Keymaster

    1) you need to move any roms to the new default folders and then delete the old folders. here is an updated rom folder list

    
amiga
amstradcpc
apple2
atari2600
atari5200
atari800
atarilynx
atarist
c64
fba
gamegear
gb
gba
gbc
genesis
intellivision
macintosh
mame-advmame
mame-mame4all
mastersystem
megadrive
msx
n64
neogeo
nes
pc
pcengine
ports
psx
quake3
scummvm
sega32x
segacd
sg-1000
snes
vectrex
zmachine
zxspectrum

    2) a full binary install, and then enabling “usbromservice” (if you use it), and it should be enough.

    03/27/2015 at 21:55 #92870
    trixster
    Participant

    Right, I’ve just tried again to update from 2.6 to 3.0, using the updated script you mentioned in the post #92853. I updated all the emulators I use including retroarch and emulationstation. All emulators which do not use retroarch seem ok. I didn’t use my old configs at all.

    The following libretro cores work ok:

    lr-imame4all
    lr-nestopia
    lr-snes9x-next

    I cannot get lr-picodrive, lr-prboom, or lr-fba to work. I did not even update lr-prboom with the latest binary. It was working fine under 2.6 and now not under the retroarch which has been installed under 3.0. Loading a rom with picrodrive or lr-fba returns a Segmentation Fault.

    What now?

    03/27/2015 at 22:09 #92873
    kmhamel
    Participant

    That’s great, simpler than I thought it would be. Just rename my rom folders. I don’t use the usbromservice since I have a rom folder on the harddrive.

    Since this will be a full install I assume I’ll have to do the second ps3 controller fix.

    03/27/2015 at 22:22 #92875
    kmhamel
    Participant

    [quote=92870]Right, I’ve just tried again to update from 2.6 to 3.0, using the updated script you mentioned in the post #92853. I updated all the emulators I use including retroarch and emulationstation. All emulators which do not use retroarch seem ok. I didn’t use my old configs at all.

    The following libretro cores work ok:

    lr-imame4all
    lr-nestopia
    lr-snes9x-next

    I cannot get lr-picodrive, lr-prboom, or lr-fba to work. I did not even update lr-prboom with the latest binary. It was working fine under 2.6 and now not under the retroarch which has been installed under 3.0. Loading a rom with picrodrive or lr-fba returns a Segmentation Fault.

    What now?
    [/quote]

    Just a thought: Check the /etc/emulationstation/es_systems.cfg.

    Look up your emulator in es_systems.cfg and make sure the rom file matches with where you stored your roms.

    03/27/2015 at 22:30 #92876
    trixster
    Participant

    Thanks for the reply. The rom locations are all correct and match es_system.cfg

    In the cases of the libretro cores that don’t work, the roms are found, certain config options such as button configs are loaded but when it gets to “Powering on HDMI with preferred settings” the emulation quits and goes back into Emulationstation. The erro log file for Street Fighter 3 Third Strike running on lr-fba is here:

    RetroArch: rarch_log_libretro: [libretro INFO] :: [FBA] Archive: sfiii3
    RetroArch: rarch_log_libretro: [libretro INFO] :: Game: sfiii3
    RetroArch: rarch_log_libretro: [libretro INFO] :: Frontend supports RGB565 – will use that instead of XRGB1555.
    RetroArch: rarch_log_libretro: [libretro INFO] :: has_analog: 0
    RetroArch: rarch_log_libretro: [libretro INFO] :: drvname: sfiii3
    RetroArch: rarch_log_libretro: [libretro INFO] :: genre: 8
    RetroArch: rarch_log_libretro: [libretro INFO] :: hardware: 150994944
    RetroArch: rarch_log_libretro: [libretro INFO] :: P1 Coin – assigned to key: RetroPad Button Select, port: 0.
    RetroArch: rarch_log_libretro: [libretro INFO] :: P1 Coin – has nSwitch.nCode: 6.
    RetroArch: rarch_log_libretro: [libretro INFO] :: P1 Start – assigned to key: RetroPad Button Start, port: 0.
    RetroArch: rarch_log_libretro: [libretro INFO] :: P1 Start – has nSwitch.nCode: 2.
    RetroArch: rarch_log_libretro: [libretro INFO] :: P1 Up – assigned to key: RetroPad D-Pad Up, port: 0.
    RetroArch: rarch_log_libretro: [libretro INFO] :: P1 Up – has nSwitch.nCode: c8.
    RetroArch: rarch_log_libretro: [libretro INFO] :: P1 Down – assigned to key: RetroPad D-Pad Down, port: 0.
    RetroArch: rarch_log_libretro: [libretro INFO] :: P1 Down – has nSwitch.nCode: d0.
    RetroArch: rarch_log_libretro: [libretro INFO] :: P1 Left – assigned to key: RetroPad D-Pad Left, port: 0.
    RetroArch: rarch_log_libretro: [libretro INFO] :: P1 Left – has nSwitch.nCode: cb.
    RetroArch: rarch_log_libretro: [libretro INFO] :: P1 Right – assigned to key: RetroPad D-Pad Right, port: 0.
    RetroArch: rarch_log_libretro: [libretro INFO] :: P1 Right – has nSwitch.nCode: cd.
    RetroArch: rarch_log_libretro: [libretro INFO] :: P1 Weak Punch – assigned to key: RetroPad Button Y, port: 0.
    RetroArch: rarch_log_libretro: [libretro INFO] :: P1 Weak Punch – has nSwitch.nCode: 1e.
    RetroArch: rarch_log_libretro: [libretro INFO] :: P1 Medium Punch – assigned to key: RetroPad Button X, port: 0.
    RetroArch: rarch_log_libretro: [libretro INFO] :: P1 Medium Punch – has nSwitch.nCode: 1f.
    RetroArch: rarch_log_libretro: [libretro INFO] :: P1 Strong Punch – assigned to key: RetroPad Button L, port: 0.
    RetroArch: rarch_log_libretro: [libretro INFO] :: P1 Strong Punch – has nSwitch.nCode: 20.
    RetroArch: rarch_log_libretro: [libretro INFO] :: P1 Weak Kick – assigned to key: RetroPad Button B, port: 0.
    RetroArch: rarch_log_libretro: [libretro INFO] :: P1 Weak Kick – has nSwitch.nCode: 2c.
    RetroArch: rarch_log_libretro: [libretro INFO] :: P1 Medium Kick – assigned to key: RetroPad Button A, port: 0.
    RetroArch: rarch_log_libretro: [libretro INFO] :: P1 Medium Kick – has nSwitch.nCode: 2d.
    RetroArch: rarch_log_libretro: [libretro INFO] :: P1 Strong Kick – assigned to key: RetroPad Button R, port: 0.
    RetroArch: rarch_log_libretro: [libretro INFO] :: P1 Strong Kick – has nSwitch.nCode: 2e.
    RetroArch: rarch_log_libretro: [libretro INFO] :: P2 Coin – assigned to key: RetroPad Button Select, port: 1.
    RetroArch: rarch_log_libretro: [libretro INFO] :: P2 Coin – has nSwitch.nCode: 7.
    RetroArch: rarch_log_libretro: [libretro INFO] :: P2 Start – assigned to key: RetroPad Button Start, port: 1.
    RetroArch: rarch_log_libretro: [libretro INFO] :: P2 Start – has nSwitch.nCode: 3.
    RetroArch: rarch_log_libretro: [libretro INFO] :: P2 Up – assigned to key: RetroPad D-Pad Up, port: 1.
    RetroArch: rarch_log_libretro: [libretro INFO] :: P2 Up – has nSwitch.nCode: 4002.
    RetroArch: rarch_log_libretro: [libretro INFO] :: P2 Down – assigned to key: RetroPad D-Pad Down, port: 1.
    RetroArch: rarch_log_libretro: [libretro INFO] :: P2 Down – has nSwitch.nCode: 4003.
    RetroArch: rarch_log_libretro: [libretro INFO] :: P2 Left – assigned to key: RetroPad D-Pad Left, port: 1.
    RetroArch: rarch_log_libretro: [libretro INFO] :: P2 Left – has nSwitch.nCode: 4000.
    RetroArch: rarch_log_libretro: [libretro INFO] :: P2 Right – assigned to key: RetroPad D-Pad Right, port: 1.
    RetroArch: rarch_log_libretro: [libretro INFO] :: P2 Right – has nSwitch.nCode: 4001.
    RetroArch: rarch_log_libretro: [libretro INFO] :: P2 Weak Punch – assigned to key: RetroPad Button Y, port: 1.
    RetroArch: rarch_log_libretro: [libretro INFO] :: P2 Weak Punch – has nSwitch.nCode: 4080.
    RetroArch: rarch_log_libretro: [libretro INFO] :: P2 Medium Punch – assigned to key: RetroPad Button X, port: 1.
    RetroArch: rarch_log_libretro: [libretro INFO] :: P2 Medium Punch – has nSwitch.nCode: 4081.
    RetroArch: rarch_log_libretro: [libretro INFO] :: P2 Strong Punch – assigned to key: RetroPad Button L, port: 1.
    RetroArch: rarch_log_libretro: [libretro INFO] :: P2 Strong Punch – has nSwitch.nCode: 4082.
    RetroArch: rarch_log_libretro: [libretro INFO] :: P2 Weak Kick – assigned to key: RetroPad Button B, port: 1.
    RetroArch: rarch_log_libretro: [libretro INFO] :: P2 Weak Kick – has nSwitch.nCode: 4083.
    RetroArch: rarch_log_libretro: [libretro INFO] :: P2 Medium Kick – assigned to key: RetroPad Button A, port: 1.
    RetroArch: rarch_log_libretro: [libretro INFO] :: P2 Medium Kick – has nSwitch.nCode: 4084.
    RetroArch: rarch_log_libretro: [libretro INFO] :: P2 Strong Kick – assigned to key: RetroPad Button R, port: 1.
    RetroArch: rarch_log_libretro: [libretro INFO] :: P2 Strong Kick – has nSwitch.nCode: 4085.
    RetroArch: rarch_log_libretro: [libretro INFO] :: WARNING! Button unaccounted for: [Reset].
    RetroArch: rarch_log_libretro: [libretro INFO] :: Reset – has nSwitch.nCode: 3d.
    RetroArch: rarch_log_libretro: [libretro INFO] :: WARNING! Button unaccounted for: [Diagnostic].
    RetroArch: rarch_log_libretro: [libretro INFO] :: Diagnostic – has nSwitch.nCode: 3c.
    RetroArch: rarch_log_libretro: [libretro INFO] :: WARNING! Button unaccounted for: [Service].
    RetroArch: rarch_log_libretro: [libretro INFO] :: Service – has nSwitch.nCode: a.
    RetroArch: rarch_log_libretro: [libretro INFO] :: WARNING! Button unaccounted for: [Region].
    RetroArch: rarch_log_libretro: [libretro INFO] :: Region – has nSwitch.nCode: 3.
    /opt/retropie/supplementary/runcommand/runcommand.sh: line 534: 2620 Segmentation fault /opt/retropie/emulators/retroarch/bin/retroarch -L /opt/retropie/libretrocores/lr-fba/fb_alpha_libretro.so –config /opt/retropie/configs/fba/retroarch.cfg “/home/pi/RetroPie/roms/fba/sfiii3.zip” –appendconfig /tmp/retroarch.cfg

    03/27/2015 at 22:44 #92879
    petrockblog
    Keymaster

    trixter: when you say you updated all the emulators you use ? do you mean you did that from menu 5? that will not be sufficient if so – you need to do a full binary install.

    03/27/2015 at 22:46 #92880
    petrockblog
    Keymaster

    also – please post the contents of /opt/retropie/configs/fba/retroarch.cfg

    03/27/2015 at 22:46 #92881
    trixster
    Participant

    yes, from menu 5 but i also updated retroarch and emulationstation. I also did an apt-get update and apt-get upgrade first. ill try a full binary update now.

    03/27/2015 at 22:52 #92883
    petrockblog
    Keymaster

    that won’t matter – the only way to upgrade is the full binary install – but to be honest, I recommend backing up configs and starting from a fresh image. quicker to do it like that imho.

    03/27/2015 at 22:54 #92884
    trixster
    Participant

    config attanched with .cfg removed from the end to get it to upload

    03/27/2015 at 22:55 #92885
    noldor
    Participant

    After an update of the retropie-update script and then a full binary install seems to works anything.
    Anyway the new advanceMame it’s slow when using some video filter (that on the old version works at good speed) on my raspberry 2. There a quick way to downgrading to the 0.94 version ?

    03/27/2015 at 22:56 #92887
    petrockblog
    Keymaster

    in the pre launch menu (press x or m when you get the black screen before emulator loads)

    03/27/2015 at 23:11 #92891
    trixster
    Participant

    A full binary install makes no difference to the problems I’m encountering. lr-picodrive, lr-fba and lr-prboom still quit back to emulationstation.

    03/27/2015 at 23:27 #92893
    petrockblog
    Keymaster

    Then I will need to see some configs – use an external site like pastebin please.

    03/27/2015 at 23:36 #92895
    trixster
    Participant

    okey dokey, here’s the pastebin of retroarch.cfg from the fba folder

    http://pastebin.com/nCyH1N7R

    Thanks for looking into this, i’m sure it’s something I’ve screwed up on!

    03/27/2015 at 23:47 #92896
    petrockblog
    Keymaster

    nothing that stands out, but I wasn’t expecting so many configs in that file – usually it would just be a few configs to override the defaults so i assume you must hve saved the configs out at some point to it – did you try stripping it back to just the “include” to see if that helps ?

    have you also modified the all/retroarch.cfg file ?

    I really think you should start from the beta image – and go from there. I don’t really have time to help further. sorry.

    03/27/2015 at 23:53 #92897
    trixster
    Participant

    ok, stripping it all down to the include makes it work! Nice one! Something in the config was causing the issue. I can troubleshoot it from here, ta.

    03/28/2015 at 01:33 #92910
    herbfargus
    Member

    glad to see you back with another helpful comment :) the genesis and megadrive are the exact same folder as they are are symlinked so it doesnt matter which one you put your roms in because it all ends up in the same megadrive folder. It was added to accomodate the fellows in the U.S. who may not know that the genesis is called the megadrive everywhere else in the world.

    03/28/2015 at 02:14 #92912
    petrockblog
    Keymaster

    oldchocobo

    Take it up with emulationstation – we are mostly following their naming scheme.

    https://github.com/Aloshi/EmulationStation/blob/08c2c561ca34f185dacca7621ce0841e5503a4e3/es-app/src/PlatformId.cpp#L54

    We can add a symlinked playstation folder if people really do get confused, but it is common to call the PlayStation “PSX”. No-one has got confused over this yet. If they had I’m sure you would be around to offer help in your usual manner.

    “The PlayStation (officially abbreviated as PS and unofficially, but more commonly known as PSX or PS1) is a video game console developed and marketed by Sony Computer Entertainment”

    http://en.wikipedia.org/wiki/PlayStation_%28console%29

    Oh and you are right, I’ve not had much time for playing games – if I had, you wouldn’t have a v3.0 beta to moan about.

    03/28/2015 at 04:02 #92920
    thex
    Participant

    Still setting up a new build with 3.0 For Rasp B.

    I love the new RetroPie menu! makes setting up much easier.

    I have a suggestion – is it possible to include a wifi script/setup command in the new RetroPie menu?

    03/28/2015 at 04:52 #92922
    monochromatic
    Participant

    On a fresh 3.0 beta SD card, I had some issues with keyboard layout too (trying to set it to US 101-key). I went through the raspi-config script, and it seemed to work (and it actually updated /etc/default/keyboard with my selections)… but it was in fact stuck with the UK layout.

    Doing a binary install from retropie_setup.sh seemed to fix things though.

    03/28/2015 at 06:11 #92933
    kornbaby
    Participant

    [quote=92844]I’m having some issues with the controllers.
    I do the retroarch config like usual, but the retroarch.cfg remains unchanged. Could be something about permissions, will check that later.
    SNES controllers are all messed up.

    So far I’ve liked the changes made. I’ll just have to try each of the emulators and options to find the most optimal one for each system.
    [/quote]

    please let me know if you figure this out. I’m also having the issue where I put my custom configs in the retroarch.cfg file for each respective emulator and it seems to ignore that and just read the one thats in the “all” folder.

  • Author
    Posts
Viewing 35 posts - 1 through 35 (of 41 total)
1 2
  • The forum ‘Everything else related to the RetroPie Project’ is closed to new topics and replies.