Homepage › Forums › RetroPie Project › Everything else related to the RetroPie Project › FB Alpha 0.2.97.35 ??

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • 03/10/2015 at 18:42 #90894
    Anonymous
    Inactive

    Has the latest version of FBA been complied for RPi2 yet??

    03/10/2015 at 21:28 #90904
    Anonymous
    Inactive

    .35 works but its much slower than .30 on rpi2.

    https://github.com/libretro/libretro-fba recent mainline 0.2.97.35
    I compiled this last week and suffered major slowdowns in CPS2/3 games

    https://github.com/libretro/fba-libretro 0.2.97.30 works really well giving a good balance of performance vs relatively new rom sets. its the one retropie uses and i wouldn’t recommend upgrading at the moment.

    03/10/2015 at 21:43 #90909
    Anonymous
    Inactive

    Ok thanks. whats the deal with hardly any (if any at all) Namco games not being supported by FAB?

    03/11/2015 at 00:46 #90932
    Floob
    Member

    What about the native non-libretro FBA that comes on 2.6.0 – the performance seems ok? Or maybe I dont test enough games :)

    03/11/2015 at 02:00 #90937
    justinbeaird
    Participant

    FBA liberto runs great on rpi2, but you will need to remap the exit+hotkey button on controller or it won’t let you input coin in some games

    03/11/2015 at 04:54 #90949
    scaryevilguy
    Participant

    FBA liberto runs great on rpi2, but you will need to remap the exit+hotkey button on controller or it won’t let you input coin in some games

    In FBA Libretro, the Coin input (Select Button) works fine for me on NeoGeo games but not on Capcom ones. Is there something I can add to the config to force it to use select as Coin input? How did you fix it justinbeaird?

    03/11/2015 at 05:55 #90964
    justinbeaird
    Participant

    What controller are you using? on my Xbox controller I made the hotkey the back button and the big Xbox button in center of controller the exit button+insert coin and it is working fine.

    03/11/2015 at 06:27 #90968
    scaryevilguy
    Participant

    I’m using a logitech dual action.

    03/11/2015 at 06:30 #90969
    justinbeaird
    Participant

    Basicly just try switching the hotkey button and the exit button in controller config and see if that works

    03/11/2015 at 11:54 #90989
    Anonymous
    Inactive

    On rpi2, you need to compile https://github.com/libretro/libretro-fba with “make -f makefile.libretro profile=performance” to use a hack on SH-2 emulator (which allow to run CPS3 games at full speed), i mentioned it when i reported my libretro port on this forum. Also i did not experience any slow down on m68k games (CPS,CPS2,Cave,…), you sure about that ? Could you name some games ? You ran retroarch through runcommand.sh to set cpu governor on performance ?

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
  • The forum ‘Everything else related to the RetroPie Project’ is closed to new topics and replies.