Has anyone used the Raphnet 4x SNES/NES USB adapter circuit?

This topic has 7 replies, 6 voices, and was last updated 8 years, 11 months ago by p4r4d0x86.

Viewing 8 posts - 1 through 8 (of 8 total)

Author

Posts
07/14/2013 at 16:58 #2472

Dazz
Participant

http://www.raphnet-tech.com/products/4nes4snes/index.php

I have a couple of these laying around from a previous project. I’m looking at starting my NES Pi project and was wondering if anyone has used these under Pi.

Their docs state: Under Linux, 1 controller with 8 axis and 32 buttons appears.

Anyone know if this means I will only be able to use 1 controller under Pi with this adapter?

04/21/2014 at 12:36 #6209
floeggu87
Participant
I used the nes2usb circuit (http://www.raphnet-tech.com/products/AnodeNES_circuit/index.php) within my project.

I managed to get it working in my NESpi-Mod.

As described by raphnet the controller is recognised as 1 controller with 4 axis and 16 buttons (as it can also used with two snes controllers).

Within the retropie menu i can only use the first controller.

es_input.cfg:
```
<?xml version="1.0"?>
<inputList>
	<inputConfig type="keyboard" />
	<inputConfig type="joystick" deviceName="raphnet.net nes2usb">
		<input name="a" type="button" id="7" value="1" />
		<input name="b" type="button" id="6" value="1" />
		<input name="down" type="axis" id="1" value="1" />
		<input name="left" type="axis" id="0" value="-1" />
		<input name="menu" type="button" id="4" value="1" />
		<input name="right" type="axis" id="0" value="1" />
		<input name="select" type="button" id="5" value="1" />
		<input name="up" type="axis" id="1" value="-1" />
	</inputConfig>
</inputList>
```
Input config in retroarch.cfg:
```
input_player1_joypad_index = "0"
input_player1_a_btn = "7"
input_player1_b_btn = "6"
input_player1_y_btn = ""
input_player1_x_btn = ""
input_player1_select_btn = "5"
input_player1_start_btn = "4"
input_player1_l_btn = ""
input_player1_r_btn = ""
input_player1_up_axis = "-1"
input_player1_down_axis = "+1"
input_player1_left_axis = "-0"
input_player1_right_axis = "+0"

input_player2_joypad_index = "0"
input_player2_a_btn = "15"
input_player2_b_btn = "14"
input_player2_y_btn = ""
input_player2_x_btn = ""
input_player2_select_btn = "13"
input_player2_start_btn = "12"
input_player2_l_btn = ""
input_player2_r_btn = ""
input_player2_up_axis = "-3"
input_player2_down_axis = "+3"
input_player2_left_axis = "-2"
input_player2_right_axis = "+2"
```
I think the raphnet 4x SNES / NES should work similar to mine ;)
04/21/2014 at 12:55 #6211

RazorX2014
Participant

yeah should be fine the only issue you will face is trying to find 4 nes or snes connectors because you will only get the bare board with that.

02/11/2015 at 17:58 #87027
floeggu87
Participant
I used this board as well. It took some time soldering it together.

On one end you solder on the usb-connector and on the other either a SNES/NES controller or a connector (also available at raphnet) –> http://www.raphnet-tech.com/products/snes_controller_connector/index.php

The Configuration is very similar to the one I used with the nes2usb circuit.

es_input.cfg:
```
	<inputConfig type="joystick" deviceName="raphnet.net 4nes4snes" deviceGUID="030000009b2800000300000001010000">
		<input name="a" type="button" id="4" value="1" />
		<input name="b" type="button" id="0" value="1" />
		<input name="down" type="axis" id="1" value="1" />
		<input name="left" type="axis" id="0" value="-1" />
		<input name="pagedown" type="button" id="6" value="1" />
		<input name="pageup" type="button" id="7" value="1" />
		<input name="right" type="axis" id="0" value="1" />
		<input name="select" type="button" id="2" value="1" />
		<input name="start" type="button" id="3" value="1" />
		<input name="up" type="axis" id="1" value="-1" />
	</inputConfig>
```
retroarch.cfg:
```
input_player1_joypad_index = 0
input_player2_joypad_index = 0

input_player1_a_btn = 4
input_player1_b_btn = 0
input_player1_y_btn = 1
input_player1_x_btn = 5
input_player1_start_btn = 3
input_player1_select_btn = 2
input_player1_l_btn = 6
input_player1_r_btn = 7

input_player2_a_btn = 12
input_player2_b_btn = 8
input_player2_y_btn = 9
input_player2_x_btn = 13
input_player2_start_btn = 11
input_player2_select_btn = 10
input_player2_l_btn = 14
input_player2_r_btn = 15

input_player1_up_axis = -1
input_player1_down_axis = +1
input_player1_left_axis = -0
input_player1_right_axis = +0

input_player2_up_axis = -3
input_player2_down_axis = +3
input_player2_left_axis = -2
input_player2_right_axis = +2

input_enable_hotkey_btn = 2
input_exit_emulator_btn = 3
input_save_state_axis = -1
input_load_state_axis = +1
```
I only configured two connectors, as I just needed two.

My only problem left is: when quitting an emulator –> controlls point up and left till I press any button.
06/07/2015 at 07:41 #99224

bronzegate78
Participant

I hate to reopen an old thread, but I have been trying to get the darn raphnet nes2usb adapter player 2 working and for the life of me I can’t figure out what I am doing wrong. I have all my inputs inserted correctly and have uncommented all lines that are to be used. also uncommented auto detect and and made it false. is there something I am missing or is there additional steps in getting the second player controller to work. by the way i am use to NES controllers.

06/08/2015 at 13:55 #99280

koffieleut
Participant

Hi there,
I had the same problem with the d-pad thingy, I looked up controller issues on this forum and found a similar issue with an other controller. This issue was fixed with a custom kernel, I tried this method and it worked flawlessly, even 4 player bomberman on pce works great. If you search on my name on this forum you should find this topic. I don’t have much posts so it shouldn’t be that hard to find ;)

06/25/2015 at 01:40 #100666

bronzegate78
Participant

Thanks for the quick response Koffieleut, but I also tried the custom kernel provided by freechains. that fixed he issue with not showing all available axis. so that issues was fixed. I add the second controller by configuring the retroarch.cfg file but I’m not sure if I did it right or not as the second controller is still not working. In emulation station it is possible to config controller 2 and it will work to navigate Emulation station but when I open a 2 player game like contra, only the first player controller works. Is there anywhere where I can find a walk-through on how to configure the retroarch.cfg file so that the second controller works. thank you very much for any help you may offer, I truly appreciate it.

12/26/2015 at 11:08 #112517

p4r4d0x86
Participant

It works with usb quirks on retropie 3.3 (no longer required custom kernel) :
https://www.petrockblock.com/forums/topic/autofire-on-the-axis/page/7/#post-112516
Author

Posts

Viewing 8 posts - 1 through 8 (of 8 total)

The forum ‘Everything else related to the RetroPie Project’ is closed to new topics and replies.

Login