Homepage › Forums › RetroPie Project › Everything else related to the RetroPie Project › managing roms inside of Raspbian

Tagged: , ,

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • 05/08/2013 at 03:35 #1718
    Wyatt Kovich
    Participant

    I am having issues manually putting roms into any of the rom folders.

    Here is my setup:

    raspberry pi B
    retropie installed with binaries (didn’t use the compile option)
    setup samba sharing with 0777 access (read and write)

    now, I am able to get into my samba share folder (where all my roms are)

    but when I try a copy paste operation into the
    /home/root/RetroPie/roms/xxxx I get a permission denied error.

    I am VERY new to linux and my searching is coming up empty.

    How to give myself access to read and write to the /home/root folder and its sub-directories?

    I am guessing this will be a chmod or chown command?

    05/08/2013 at 04:54 #1719
    Wyatt Kovich
    Participant

    for what it is worth something went wrong during the installation.

    I re-installed retropie and now all the folders are in the home/pi/ sub-directory.

    05/08/2013 at 19:39 #1723
    goncalocg
    Participant

    Hello! I’m also new to linux so I can’t answer you directly, I just can tell you how I did it…

    I’ve installed WinSCP in my computer and from there I can transfer the roms to the Pi.. check your IP in the PI with “ifconfig” and put that IP in the connection you’re going to create with winSCP while choosing SCP connection…browse to the folder and paste them…

    Sorry for not answering you directly and hope this helps

    05/08/2013 at 20:43 #1724
    petrockblog
    Keymaster

    There is also a wiki site for that issue at https://github.com/retropie/RetroPie-Setup/wiki/How-to-get-ROMs-on-the-SD-card.

    05/08/2013 at 20:49 #1725
    Wyatt Kovich
    Participant

    My issue seemed to be centered around the install directory of retropie, for some reason during my first install attempt it installed itself (although it was missing a lot) to the home/root/… directory.

    My issues appear to be solely based upon the folder locations being inside of root (which must have been my error)

    I reinstalled retropie again after updating the setup script and everything was installed to the correct /home/pi/…. directory.

    I could ssh into the pi and access the root folders but was still unable to add roms. Now that the install is in the correct folder I have no problem adding them to the correct folders especially through samba :)

    Now I just have to deal with my blank black screen errors!

    Thanks for all the support so far :)

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • The forum ‘Everything else related to the RetroPie Project’ is closed to new topics and replies.