Homepage › Forums › RetroPie Project › Everything else related to the RetroPie Project › MAME Bios Help

Viewing 13 posts - 1 through 13 (of 13 total)
  • Author
    Posts
  • 01/19/2016 at 19:35 #114415
    electronictofu
    Participant

    Hi all,
    I’ve had my Pi for a while and need some help with MAME. I finally sourced 0.375B roms which is the correct type from what I read? If that’s so, w
    Where might someone find the correct Bios file?
    Also, does the Bios file go in each folder for each rom/ do they stay zipped?

    Kind of newbie stuff Im sure, but I’ve tried so many methods and failed.

    01/19/2016 at 19:45 #114417
    labelwhore
    Participant

    it’s neogeo.zip and should be included with the roms. It goes in the rom folder, unlike with other emulators. Your roms need to stay zipped (the bios too).

    To ensure you have he correct roms, walk through this guide:

    https://github.com/retropie/RetroPie-Setup/wiki/Managing-ROMs

    IMO it’s best to start with the latest rom set you can find (it helps to also have the rollback romset that matches the new set as well) and simply rebuild them to the version you need using that guide. You’ll always have the correct set that way. If you have both the roms and the rollback roms, you can build any version of MAME roms using clrmamepro.

    I’ve done tons and tons of testing of MAME. by far the best one to use is lr-mame2003 with mame version .106 roms. You’ll get the largest number of roms to work that way.

    01/19/2016 at 21:30 #114433
    electronictofu
    Participant

    Thanks this will help a lot!
    Is there a section on that link for the MAME/ Neogeo BIOS file? That’s not the same as the DAT files I take it?

    Irmame2003 is a peticular emulator, instead of MAME4all?
    Maybe I’ll look into the .106 roms.

    01/19/2016 at 21:34 #114435
    herbfargus
    Member

    FORUM RULES (ALSO ON POSTING IN REGARDS TO ROMS/GAME IMAGES)

    01/19/2016 at 22:27 #114448
    labelwhore
    Participant

    The BIOS will come with the roms.

    That’s right lr-mame2003 is one of the other options for mame. Just as an FYI, I had the easiest time finding the .155 rollback roms, rather than grabbing the very latest set, I looked for the latest rollback set I could find first, then looked for the working rom set to match it.

    01/19/2016 at 23:33 #114449
    electronictofu
    Participant

    Hmmm, ok cool. For now since I found a rompack for 0.375B I’ll give those a shot. I tried loading them from my iMac onto my USB flash card, then onto the Pi, I did that with SNES and NES and it all recognized and saved them over automatically, I haven’t had the same luck with MAME ROMS. I tried the same method as SNES last night on the 0.375B… nothin’ errrr.

    01/19/2016 at 23:40 #114450
    labelwhore
    Participant

    I’ve never really played with loading roms that way, so I can’t help there. I’ve just been using Filezilla and transferring roms via SSH.

    01/20/2016 at 01:51 #114458
    electronictofu
    Participant

    Thanks, I have wifi for my Pi but haven’t set it up yet. Could I just pull the miniSD card out of the Pi, put it in my Mac and load the files into the rom folder that way? Just do it manually?

    01/20/2016 at 12:54 #114493
    dankcushions
    Participant

    [quote=114417]
    I’ve done tons and tons of testing of MAME. by far the best one to use is lr-mame2003 with mame version .106 roms. You’ll get the largest number of roms to work that way.
    [/quote]

    don’t you mean mame version .78 roms? that’s the romset that lr-mame2003 needs. i agree with you it’s the best mame emulator.


    @electronictofu
    if you’re using mame set 0.375b5, you need to use lr-imame4all or mame4all-pi – these 2 systems work with that romset. mame2003 needs a later one so you’ll have to rebuild the set, or (better) get a new 0.78 set.

    01/20/2016 at 15:49 #114517
    labelwhore
    Participant

    Huh, that IS what the wiki says, but I swear I have version .106 roms working flawlessly in lr-mame2003. Perhaps I just have them labeled incorrectly.

    01/20/2016 at 15:53 #114520
    labelwhore
    Participant

    [quote=114458]Thanks, I have wifi for my Pi but haven’t set it up yet. Could I just pull the miniSD card out of the Pi, put it in my Mac and load the files into the rom folder that way? Just do it manually?

    [/quote]
    You’ll have to use either SSH or transfer the roms via USB. It’s easy enough to use SSH, honestly.

    01/20/2016 at 16:00 #114522
    dankcushions
    Participant

    well, mame2003 is definitely for .78, but unless you ran one of the games that had been added/changed between .78 and .106 maybe you wouldn’t notice!

    01/20/2016 at 16:09 #114524
    labelwhore
    Participant

    They all work for me, so I must have the right version. I always rebuild my mame roms before I load them onto the pi, so I’m going with my folders are labeled wrong. lol

    sorry for any misdirection.

  • Author
    Posts
Viewing 13 posts - 1 through 13 (of 13 total)
  • The forum ‘Everything else related to the RetroPie Project’ is closed to new topics and replies.