Homepage › Forums › RetroPie Project › Controller Configuration in RetroPie › Hotkeys working EXCEPT for Select+Start

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • 11/11/2015 at 09:18 #109620
    freetz
    Participant

    Hi,

    first of all thanks a million for this great project, I just love it :)!
    The device works fine in all aspects, except for a strange bug regarding the Hotkey-functionality:
    I have a iBuffalo SNES-stype USB-gamepad which is detected by Retropie without any problems. All buttons work in all the games, and also all Hotkey functions work in combination with the Select button – except pressing Select and Start to exit the emulator.
    The strange thing is that both the Start and Select buttons work in their normal function in all the emulators, it’s just the combination to exit the emulator that is not working.
    I have also checked the config file to see whether Select and Start have been assigned different button IDs, which is the case.

    Does anyone have an explanation why this is the case and how to fix it? That would really help and prevent filesystem corruption if I just plug the power to turn off the device.

    Thanks a lot in advance,

    F.

    11/11/2015 at 14:04 #109636
    Floob
    Member

    How many controllers do you have plugged into the Pi?
    Can you put on pastebin.com your controller file as well as the main retroarch.cfg file?

    11/11/2015 at 14:39 #109643
    freetz
    Participant

    Thanks for the prompt reply!

    I have the iBuffalo USB-gamepad connected, plus a Bluetooth dongle in case I use my PS3 sixaxis, but I haven’t used that one any longer after I got the iBuffalo.

    Here are my configs:

    retroarch.cfg:
    http://pastebin.com/UnFQgcZ6

    USB,2-axis8-buttongamepad.cfg
    http://pastebin.com/mDuETfVy

    PLAYSTATION(R)3Controller.cfg
    http://pastebin.com/AJZhb3Kq

    Cheers,

    F.

    11/11/2015 at 14:53 #109649
    freetz
    Participant

    Ok, I found a solution:
    In my retroarch.cfg there were these two lines at the end of the file:
    input_enable_hotkey = nul
    input_exit_emulator_btn = 12

    I think I added them because I had problems with getting the Hotkey for the PS3 controller working. After disabling these two lines, I can now use the Start button as exit button for the iBuffalo.
    The strange thing is that all the other Hotkey functions were still working despite “input_enable_hotkey = nul”.
    Just for my understanding: Does the retroarch.cfg override the controller-specific configuration files? With other Linux packages, it seems to be the other way around, i.e. the more detailed config files override the system-wide ones.

    Thanks again and sorry for the false alarm,

    F.

    11/11/2015 at 15:11 #109654
    Floob
    Member

    This line was most likely overriding your controller file one:
    input_exit_emulator_btn = 12

    The overrides can get a bit involved as there can be about 5 different ones all coming in to play with Retroarch. Check my vids below for controller and general config settings.

    11/11/2015 at 15:16 #109655
    freetz
    Participant

    Ah, okay, I’ll definitively take note of that structure next time I experiment with the settings – again, thanks a bunch for this great distribution, I just donated for the project as a little show of appreciation for the awesome work :)…

    11/11/2015 at 15:56 #109658
    Floob
    Member

    Thanks very much for your contribution.

    11/12/2015 at 22:03 #109786
    petrockblog
    Keymaster

    Can’t see any donation from you btw – you sure you donated on this site ? :)

    11/12/2015 at 22:19 #109787
    freetz
    Participant

    PayPal says: 10.00 USD from …@traintraveltogether.de to
    Should one worry clicking on the donation button on the top of your site?

    11/12/2015 at 22:28 #109791
    petrockblog
    Keymaster

    it must have somehow bypassed the wordpress plugin then that manages the donations on the donations page – https://www.petrockblock.com/donations-2/ (did you donate via another route or ?) I can only see that not the actual donations that end up in paypal (not my paypal account). Nothing to worry about though.

    11/12/2015 at 23:10 #109796
    freetz
    Participant

    That’s exactly the site I went through, and I after PayPal payment I was redirected to a page thanking me for the donation etc. and also listing previous donors. I was wondering a bit why my name didn’t show up, but then thought that you would probably add them by hand. Time was 3.16pm CET, in case that helps.

  • Author
    Posts
Viewing 11 posts - 1 through 11 (of 11 total)
  • The forum ‘Controller Configuration in RetroPie’ is closed to new topics and replies.