Homepage › Forums › RetroPie Project › New to RetroPie? Start Here! › How to Auto Mount sda1?
Tagged: mount
- This topic has 3 replies, 2 voices, and was last updated 9 years, 1 month ago by xd3l.
-
AuthorPosts
-
09/26/2015 at 04:17 #106875xd3lParticipant
I have a few drives that are 4Tb in size that I store my media on.
Since I installed Kodi inside of RetroPi, I’d really like to be able to access these. Ironically enough they do not show up under USB.What I have to do is “sudo mount /dev/sda1 /mnt”
I’d rather not have to go into the command line every time I want to access the drive in Kodi, what can I do to make RetroPie auto detect the drive like OpenElec Kodi distro does?
09/26/2015 at 05:04 #106882xd3lParticipantI am trying to follow this guide:
http://linuxconfig.org/automatically-mount-usb-external-drive-with-autofs
replacing “udevinfo -a -p /sys/block/sdc/ | grep model” with “udevadm info -a -n /dev/sda1”
I get down to:
# /etc/init.d/udev restart
Stopping the hotplug events dispatcher: udevd.
Starting the hotplug events dispatcher: udevd.Plug in external USB and your new base name is:
ls -l /dev/Iomega*
lrwxrwxrwx 1 root root 3 2011-02-23 12:36 /dev/Iomega -> sdc
lrwxrwxrwx 1 root root 12 2011-02-23 12:36 /dev/Iomega0 -> bsg/14:0:0:0
lrwxrwxrwx 1 root root 4 2011-02-23 12:36 /dev/Iomega1 -> sdc1
lrwxrwxrwx 1 root root 3 2011-02-23 12:36 /dev/Iomega3 -> sg3Please note that /dev/Iomega1 points to a /dev/sdc1, which is exactly the partition we are interested in and we use it next to configure autofs.
——–
And I do not have the custom directory in /dev/
As a work around I updated to xbmc.sh script to read:
#!/bin/bash
sudo mount /dev/sda1 /mnt && kodiThough I’d prefer if ALL of my drives auto mounted.
09/28/2015 at 12:27 #107008AnonymousInactiveI use two USB sticks to store my PC and Playstation games, and for the RetroPie setup I have I need them to always mount to the same points. I’m not sure if this works for USB hard drives too or if it’s just applicable to flash sticks, so bear that in mind. First I found out the uuid of the drive using:
sudo blkid
Then I edited etc/fstab to add a new entry. It should take the following form:
[Device] [Mount Point] [File_system] [Options] [dump] [fsck order]
So mine looked something like:
uuid=F03A-33EB /media/usb0 vfat defaults 0 0
I can’t remember exactly what I put for the options, I know I needed to alter something to get it readable and writeable – I’m away from the Pi at the moment, I’ll look it up when I get home. (the UUID is just made up there, yours will be different).
That should always mount that specific drive to /media/usb0 on boot. Again, I don’t know if it’s the same for hard drives, but my USB sticks get a new uuid every time they’re formatted.
Hope that’s helpful!
10/01/2015 at 00:12 #107128xd3lParticipantYes, you are right, I forgot all about Fastab, it has been years!
Since I started this post, I found out that since I am over clocking my Pi 2, that I increase the chances of burning out my SD card, so I opted to only initiate the boot sequence from SD, and now host my OS on my USB stick, which of course in itself also solves this problem without the need to edit Fstab.
Thank you though, maybe this will come in handy for those who don’t share my SD phobias, or just that little extra speed boot, save money, or what have you.
-
AuthorPosts
- The forum ‘New to RetroPie? Start Here!’ is closed to new topics and replies.