use controller only in retropie, no keyboard??

This topic has 11 replies, 4 voices, and was last updated 9 years, 4 months ago by herbfargus.

Viewing 12 posts - 1 through 12 (of 12 total)

Author

Posts
08/02/2015 at 21:03 #103218

noobee
Participant

i have a controller (saitek – art.no.: pp21) that works fine with my roms. but is there a solution to use the controller instead of the keyboard? at the startscreen i need ne keyboard to choose the right system (sega, nintendo …). the controller doesn’t work at the startscreen :(

08/02/2015 at 21:33 #103225

choccyhobnob
Participant

pull up the main menu in emulationstation and select configure input and it will start the configure controller process.

08/02/2015 at 21:42 #103228

noobee
Participant

i have done that before. and after a reboot i have to use the keyboard cause the controller doesn’t work. it still works in the games, but not at start :(

08/04/2015 at 18:51 #103383

noobee
Participant

no ideas anymore ? :(

08/04/2015 at 19:21 #103384

petrockblog
Keymaster

if you exit emulationstation with f4, then wait and launch it again does it work ? (after configuring it and rebooting)

08/04/2015 at 19:22 #103385

petrockblog
Keymaster

Also are you using retropie 3.0rc1 ?

08/04/2015 at 23:45 #103398

noobee
Participant

yes, using retropie-v3.0rc1-rpi2.
i dont’t understand it. the controller works everywhere. when i setup the controller, it realizes all buttons. start, select, up, down, … and i can play all games with it.
but the “console-select-screen” hates my controller. there is only keyboard allowed :(
new controller setup doesn’t work. controller setup and rebot doesn’t work, too.
always same prob, no controller @ “console-select-screen”

08/04/2015 at 23:54 #103400

herbfargus
Member

It could have something to do with it not registering the characters of your gamepad Id properly in emulationstation- when I run my virtual gamepad as an app and try and configure it with emulationstation it shows up with text characters emulation station can’t reconcile so it just doesn’t work, but idk- it could be something else entirely.

08/05/2015 at 21:48 #103482

noobee
Participant

is there another way to configure the controller? or why are the characters of my controller “not registered” ?
it seems, that it is a problem with emulationstation only. the emulators/consoles accept the controller…
maybe there is a way to copy the config from any emuator where the controller is working tho the path, where emulationstation reads the config file for the controller? u know what i mean?

08/05/2015 at 23:19 #103488
herbfargus
Member
there is a file called es_input.cfg that can be added manually (file path is /home/pi/.emulationstation I believe.):

This is for an xbox controller and a keyboard

You just have to modify the device name and buttons to match your own controller. you can type lsusb to see what your devicename is
```
<?xml version="1.0"?>
<inputList>
    <inputConfig type="keyboard" />
    <inputConfig type="joystick" deviceName="Xbox Gamepad (userspace driver)">
        <input name="a" type="button" id="4" value="1" />
        <input name="b" type="button" id="5" value="1" />
        <input name="down" type="button" id="1" value="1" />
        <input name="left" type="button" id="2" value="1" />
        <input name="menu" type="button" id="13" value="1" />
        <input name="pagedown" type="button" id="11" value="1" />
        <input name="pageup" type="button" id="10" value="1" />
        <input name="right" type="button" id="3" value="1" />
        <input name="select" type="button" id="8" value="1" />
        <input name="up" type="button" id="0" value="1" />
    </inputConfig>
    <inputConfig type="keyboard">
        <input name="a" type="key" id="13" value="1" />
        <input name="b" type="key" id="8" value="1" />
        <input name="down" type="key" id="274" value="1" />
        <input name="left" type="key" id="276" value="1" />
        <input name="menu" type="key" id="109" value="1" />
        <input name="pagedown" type="key" id="281" value="1" />
        <input name="pageup" type="key" id="280" value="1" />
        <input name="right" type="key" id="275" value="1" />
        <input name="select" type="key" id="108" value="1" />
        <input name="up" type="key" id="273" value="1" />
    </inputConfig>
</inputList>
```
08/06/2015 at 01:40 #103504

noobee
Participant

yeah, thats it. in the es_input.cfg the controller was missing. only the keyboard was entered.
to get a “clean” .cfg I decided to reinstall retropie – but this time WITHOUT a keyboard. and have a look – now the startscreen can be controlled by the controller :)
maybe I will add the keyboard later.

btw: the “es_input.cfg” is stored in /home/pi/.emulationstation

THX 4 help

08/06/2015 at 01:44 #103506

herbfargus
Member

Ah thanks for the clarification- I didn’t have access to my pi so I wasn’t sure on the filepath. I’ve ammended my post. Glad you got it sorted!
Author

Posts

Viewing 12 posts - 1 through 12 (of 12 total)

The forum ‘Controller Configuration in RetroPie’ is closed to new topics and replies.

Login